What Did You Do To Your 3rd Gen Today?

[SKRS1]

Not really today but I installed some switchbacks as DRLs

 

[jasonoflivingston]

Put air in the tires, checked CV boots after suspension mods (one has a slight leak, but no rips), cleaned my air filter....

 

[Mauzer]

Painted front bumper and skid

Still need to install skid and adjust the front bumper, didn't finish till late last night (last pic from this morning before I left for work)

 

[rakorakozy]

Hid lights installed

installed some Hid lights to the front of the stock bumper and learned about electrical in the process. Desert nights are going to look like daytime now

 

[TheeMikeB]

Finally got around to replacing my leaking valve cover gaskets. While I was there I replaced all my drive belts, upper/lower rad hoses and new coolant. And my battery wasn't holding charge so ended up with a new diehard platinum.

Boom ready for wheeling!

 

[Limbwalker]

We tried

After deciding to finally get off my @ss and do the rear diff breather mod, not a single shop in town had the union fitting, so I had to order one for tomorrow. Then I got back home and remembered I still had enough window film left to tint the 2 front windows, which apparently sat in the shed far too long and somehow developed holes in it. :frusty:
So, its just gonna sit there looking awesome while I do yard work.

 

[NCrunner2012]

Got it washed!

 

[Semprini]

2Runner owned since August 2013

I needed a new daily driver and have always wanted a truck or suv but wanted one that had decent gas mileage, so I found a 2000 V6 4Runner for sale and picked it up. I immediately fell in love with it. I only wish it was 4x4, but then I can always do a conversion and DFW has tons of salvage yards, which Ive been spending some time at recently looking for interior items. Anyway things Ive done to my 2Runner recently;

New Catalytic Converter (someone decided to cut mine off in the middle of the night, I did have a fun week terrorizing people with the loudness of the engine though lol).
New Radiator and hoses
Bought new cloth seats to replace the destroyed leather ones and a couple bezel pieces for the dash that looked pretty rugged.
So this weekend I get to have some fun and wash the new seats , dry and install them.
Oil change as well, Mobil 1 of course
And might have time to replace the spark plugs and wires.
NGK's seem to be the popular choice for plugs, but what about wires, any thoughts?

And I also bought some Michelin All Terrains LTX-MS2 265/70R16 very nice tires, been driving around DFW these past weeks with the rain and snow
and these things havent slipped once.

 

[The Deec]

I replaced both cats, Borla Cat back system, rotated tires and installed new lift gate supports. Took me about 3 hours due to rust, the absurd location of the 3 down pipe flange bolts and wiggling the old system out. Sounds amazing going back to stockish noise levels from a glass pack axle dump. I did have a a very odd work bench... a 2001 ezgo golf cart, 8 inch lift and 23's

 

[thardy]

Finished my Tire Carrier. Minus the paint!!

 

[TheArkMaster]

Gave her a much deserved wash, cleaned the inside out, took the snow racks off and installed some shitty LED's in the headlights. Took them out immediately. Anybody know of some good headlights, not HID?

I couldn't see anything.

 

[v3bahumut]

Did that today

 

[bikerjosh]

(actually Saturday) Replaced my CPS again.:mmph: :director: Denso this time. Hope it lasts. This is a f'ing pain on a S/C'd 4runner.
My hands look like I was on the losing end of a fight with a raccoon.

 

[Supra725]

Installed a new dash mount for my Garmin, and snapped a picture of of the runner with my roommates car and out quads.

Link to my dash garmin install.

http://www.toyota-4runner.org/engines-suspension-wheels-tires-audio-accessories/162193-3rd-gen-garmin-dash-mout.html



and those are chalked lines on the ground for our makeshift rally/drift RC cars.

you are alive????

 

[dustin Keeler]

got rid of my saggy bottom and installed the 99 tall springs

before


after



Also did the running board instant lift kit :bounce:

 

[Limbwalker]

This

finally got around to doing the rear diff breather mod. Im kinda sad it only took 20 minutes considering Ive put it off this long

 

[ugamurph]

I recently installed a roller fairlead on my winch. Today, I added the Factor 55 Prolink to eliminate the hook.

A few days ago I installed some PIAA 510 lights that I bought for a good deal on Craigslist.

 

[NoleRunner]

New shoes

Threw some new shoes on the beast! Nitto TG 265/75/16. Went up 1 size and some nice all terrains. Went to the beach for a light test run.

 

[cdrewferd]

Got my tires remounted after painting the rims.

 

[01thunder]

Threw some new shoes on the beast! Nitto TG 265/75/16. Went up 1 size and some nice all terrains. Went to the beach for a light test run.

i saw you yesterday! i was driving and saw your truck and commented to myself, "hey a thundercloud without running boards". cool. don't remember where though. somewhere in tampa. do you travel on nebraska? i was going northbound and saw the truck going south near columbus. was that you?