What Did You Do To Your 3rd Gen Today?

[ohio4runnerjoe]

Changed all diff and transfer case fluid. Put t100 rear brake hose on, (3" longer) installed urethane rack bushing, welded plates in on tjm bumper to put 2" clearance lighs in as new turn signals, bed armored bumper and modified borla exhaust in order to fit new rear addicted offroad bumper coming in. Hopefully install 1" body lift next weekend.

 

[Beagle(4)Runner]

My son and i changed the rear gate handle that I got from member nissanh. We ended up taking it apart three times before we got everything put back together right.

 

[Amirocassar]

Finished my remote starter with the relay I ordered... Battery died, turns out my battery was bad anyway so it wasn't the remote starter. Some cores were dead, so it was steadily dropping voltage. So obviously, changed the battery. Put all the wiring and what not back. Just did Seafoam in oil and vacuum intake today... Hoping maybe that will get rid of the rough idle. Pretty happy now, everythings running beautifully! Starts up perfectly and it's like it's brand new!

Next week is fuel filter.(someone stripped the nuts so it's going to be a bit challenging..)

 

[iNAN3 SOLDi3R]

About half way finished with the LED conversion.

 

[MTD]

Opened its door and grabbed some small hardware items purchased a few days ago. Closed door.

[MENTION=101896]isu2014[/MENTION] and I had a mod day I installed my Donahoe/Icon 2.5" coilovers and built him a set of headlights

 

[BlackonBlackT4R]

nice headlights

wow i like them headlights you built them?

 

[MTD]

wow i like them headlights you built them?

Yep those are for ryan's tacoma, you can check out the ones that i built for my T4R on my build thread and if you want to go over to the dark side I have a couple picks of the ones that i built for my 05 tacoma. I have done a couple sets lol

 

[isu2014]

They are sick too! The output is excellent.



[MENTION=94545]MTD[/MENTION] I got them aimed down some and disabled the daytime running lights. Good to go now!

 

[MTD]

They are sick too! The output is excellent.



[MENTION=94545]MTD[/MENTION] I got them aimed down some and disabled the daytime running lights. Good to go now!

How did you end up disabling them? Did you remove the part?

 

[isu2014]

How did you end up disabling them? Did you remove the part?

Just had to cut a wire on the harness to the DRL module.

 

[Ms.eileen]

4Runner KCCO

Added my first Bill Murray KCCO decal on the rear widow

Chive On!

 

[ryan93Integra]

Took more of it apart. It might look like a 3rd gen again one of these days

 

[4Running Daily]

I like hanging out in puddles.


DSC_0180 by 4Running Daily, on Flickr

DSC_0183 by 4Running Daily, on Flickr

 

[Mauzer]

I used this thread as a jumping of point:
http://www.toyota-4runner.org/3rd-gen-t4rs/66978-roof-rola-basket-custom-mounts.html

Made mine with a 8 ft piece of 1 1/4" (i think) aluminum corner thing... cut them into sections, bolted them together and then used the u bolts that came with the rack mounts to hold it down. Its at the perfect height, but it's not easy to take off. thus the reason I haven't painted that aluminum...

How did I miss that?!? Thanks for posting

 

[NateMob]

I like hanging out in puddles.

Did you have on some waders?lol :bathbaby:

 

[4Running Daily]

Did you have on some waders?lol :bathbaby:

Crawled through to the back seat and jumped holding my Nikon very closely haha

 

[NateMob]

Crawled through to the back seat and jumped holding my Nikon very closely haha

:spit: Brave man, someone should have got a picture of that jump!

 

[TRDteen]

some tender love & care.

 

[TRDteen]

What did you do to your 3rd gen today?

 

[GottaBeTRD]

well... I took a sharp turn too fast and put it on 2 wheels for the first time... i may have pooped a little :lookout: I know my passenger did lol!