What Did You Do To Your 3rd Gen Today?

[JBurt]

[MENTION=91623]CenCalifoothill15[/MENTION] That is pretty cool. Do you mind posting a link to the kit?

Do you have any more pictures of the install? What did you do to make sure the bolts don't pull through the body sheet metal?

Did you have any other safety concerns? I've thought about this before but never seen anyone do it.

 

[4RunnerKyle]

Installed this today...

 

[974rnr]

betsy

made the jump to 33's and tested them out plus still enjoying the grille i built

 

[eplanajr]

199 Tundra brake swap!
Definitely more beefy.
New calipers, rotors, soft and hard brake lines and did the !dirtybrakefluid mod.

 

[cj80cruiser]

Installed this today...

Did you cut a couple inches off the front legs like I've heard most say is necessary?

 

[kammando808]

finished my 231 tundra swap

 

[vincer77]

Painted wheels using VHT Matte Engine Metallic

 

[4RunnerKyle]

Did you cut a couple inches off the front legs like I've heard most say is necessary?

Yup... 2 inches out of the front legs... However, I bought this off another 3rd gen. Owner so all the cutting and welding was already done for me... Lucked out there

 

[madcanvis]

974rnr! Are you serious!! That thing is awesome!
Anyway... Removed "torque steer"by a simple "remove and replace" driver's side rear lower control arm with new.

 

[974rnr]

974rnr! Are you serious!! That thing is awesome!
thanks man... Its just a grille out of a five lug taco then i cut out the stock grilles insides, made a chicken wire frame, put mesh on the wire and an emblem out of a 1980 series pickup... it was relatively easy to do plus i have pictures from the build too!!

 

[Taylor20]

Well i did this yesterday but whatever-



We had nowhere to anchor the safety straps, so I found this kit on ebay for around $10 & it worked out great!

[MENTION=91623]CenCalifoothill15[/MENTION] That is pretty cool. Do you mind posting a link to the kit?

Do you have any more pictures of the install? What did you do to make sure the bolts don't pull through the body sheet metal?

Did you have any other safety concerns? I've thought about this before but never seen anyone do it.

Check my build thread. Toyota offers one

 

[MattAK]

Added 5HP and 1 MPG.

 

[CenCalifoothill15]

Check my build thread. Toyota offers one

-Good to know! :boink:

I'm definitely going to do that once my girl is no longer in the rear facing position.

 

[lowlinkin]

Installed my new to me rack today! Gotta love freebies!

 

[Jaketino]

Got the wheels painted and back on. Gotta say it looks so much better.

Also changed my oil and switched to synthetic.

 

[TCMach]

made the jump to 33's and tested them out plus still enjoying the grille i built

Whoa, this thing is a beast! I'll be out in steamboat sometime this summer probably, might have to hit a trail or two!

 

[GVL]

Rear differential breather extension checked off the list.

 

[Kryptoroxx]

Built a custom airbox to limit the amount of dust that gets dragged in the CAI without limiting airflow

 

[eplanajr]

Finally fixed my cup holders. I accidentally came across a thread about how they are a super easy fix. It was right. Took me 3 minutes and didn't cost as penny.

 

[habanero]

The 99 got used to trailer a Taurus (not ours) w/non-functioning tranny and the 96 to pull it off the trailer using the front hitch.