What Did You Do To Your 3rd Gen Today?

[infamousRNR]

I got some remans with the extended boots from CVJ axles. So far so good after 5 months!

Ahhhh so it was you!!! They have red inner boots correct?

 

[JerkyDrewster]

Ahhhh so it was you!!! They have red inner boots correct?

Only if you decide to get the extended inner boots. The normal size is still black. The extended outer boot is blue I believe, but completely unnecessary for anything I do.

 

[Rizzels_Runner]

I got some remans with the extended boots from CVJ axles. So far so good after 5 months!

Thanks for chiming in! i will check them out. Thanks everyone for the input. Cant wait to have the new and improved runner back on the road!

 

[Raddy21]

you know you can pop out that rear bumper trim in like 2 seconds...


the limited flares and trim, not so much....

looks good though!

I actually didn't know that but with me being super lazy and it was raining out and late, this worked ok for me.

And yes when/if I do the limited trim & flares, I'll just mask off also

thanks!

 

[Rock_Rat]

Tundra brake upgrade, sway bar bushings on the rear and holy shit what a difference some real tires made for the appearance.

Remind me not to park next to you.We both might just jump in the wrong rig. I mean seriously...Mine HERE
Looks good! BTW, you'll love the TBU and very smart to do that before your tires.

 

[99Runnr]

Remind me not to park next to you.We both might just jump in the wrong rig. I mean seriously...Mine HERE
Looks good! BTW, you'll love the TBU and very smart to do that before your tires.

Yeah, gotta upgrade the braking capabilities with heavier tires right?

Funny your down in Cowlitz county, my ex lives in Toledo. I use to be down there all the time tearing it up partying with people.

 

[alumarine]

Changed the oil and checked transfer case and diffs.

 

[GGFerrier]

Installed the double cup holder and new OEM switches for the lightbar and backup lights.

 

[NWFLBowhunter]

Extended the rear bump stops, LBJs, brake lines, TBU, SCS wheels, and Cooper ST Maxx 315/70/17 tires. Tomorrow... Addressing the front rubbing issues. Been an expensive week so far.

 

[Bstrom]

Installed the double cup holder and new OEM switches for the lightbar and backup lights.

Where did you get that cup holder? I like the way it connects to the console.

And, did you flop the switches on purpose?

 

[stir_fry_boy]

LCA and UCA bushings, UBJs. BIG JOB.

 

[GGFerrier]

Where did you get that cup holder? I like the way it connects to the console.



And, did you flop the switches on purpose?

He sells them online, but here's the thread...

http://www.toyota-4runner.org/3rd-gen-t4rs/196115-there-need-cup-holders-96-98-a.html

As for the switches the holes are notched for the OEM switches. I organized them so the indicator light is oriented with their position of the lights on the vehicle.

 

[Chino5356]

Hit 240,000 on the Odometer Today

 

[DavidH.]

I put in my WeatherTech Floor Liners that I got for Christmas. Huge improvement from the worn out carpet mats! Now I just need to find the motivation to swap the HVAC LEDs in and install the Marlin Shift Seat and socket that I also got.

 

[Bstrom]

He sells them online, but here's the thread...

http://www.toyota-4runner.org/3rd-gen-t4rs/196115-there-need-cup-holders-96-98-a.html

As for the switches the holes are notched for the OEM switches. I organized them so the indicator light is oriented with their position of the lights on the vehicle.

Thanks for the link. Your switches make sense now. I'm going to use one like that to manually raise and lower my antennae as the Kenwood head I bought leaves it up during USB play. Will tie the front and back antenna signals with a jumper at the same time.

 

[SupaSupra]

Put WeatherTech floorliners in today. Happy I finally got them.

 

[ndcent]

CBI hybrid rear to match the front!

 

[TheOGConCon]

Time to get rid of that blasted squeak in the cab

 

[Badmotorfinger]

Back up cam...

 

[NWFLBowhunter]

Cut into the fenders and pinch welds same as [MENTION=67615]Dirtco[/MENTION] did on page 2&3 of his build (thanks for the write up)to clear my 315s. Still need to fill in the hole with some sheet metal, but that will have to wait till I can get it over to my cousins shop. Gave it a quick bath. Will get some better pictures if it ever stops raining. Tomorrow I will be replacing the PS pump, this one has been toast for about a month now.