What Did You Do To Your 3rd Gen Today?

[jmferg]

This is gonna look and work great!

It's the complete PowerStop truck/SUV kit with drilled/slotted rotors, carbon ceramic pads, and reman'd calipers designed for a 2005 tundra.
Hopefully they clear my 2001 5 star wheels so I don't have to do any grinding on the nice, red powdercoating


Sent from my iPhone using Tapatalk

 

[Mindomission]

Shiny and clean

Them there are purdy! Don't forget the TRD decals and a coat or two of clearcoat for the calipers!

 

[t4rFL]

got my bumper a day early

 

[ALR85]

went to pick-a-part and got a headlight assembly and a tail light assembly to pass state inspection. Took 6 hours and 3 junkyards to track down the pair.

 

[habanero]

Tested and replaced the back-up light switch, have reverse lights again.

It's not rust on the tranny, it's Utah.

 

[4Runner4TW]

Installed Bilstein 5100 in the rear with OME 906 and 10mm trim packer.

Tomorrow the fronts go in along with new OTRE's and upper A Arm bushings.

 

[madcanvis]

OMG! Grab the shop vac

Have to check my airbox as a weekly PM...How do I stop this madness??!!!

:cry2:

 

[AZBub]

Have to check my airbox as a weekly PM...How do I stop this madness??!!!

Maybe some wire screen installed between the airbox and the tube in the fender? Thats just nutty.

 

[JBurt]

Have to check my airbox as a weekly PM...How do I stop this madness??!!!

:cry2:

Wow that hilarious! Have you tried putting a screen on your intake either at the elbow or inside the fender? I'm assuming squirrels right?

 

[h20driven]

Bought factory radio and climate control from toyota recyclers. Next, need to buy the retractable antenna from the stealership. Fml.

 

[MACT4R]

Had a front transfer case seal leak and changed it last night. Took about 2hrs. Not bad.

Sent from my SM-G930P using Tapatalk

 

[phattyduck]

Bought factory radio and climate control from toyota recyclers. Next, need to buy the retractable antenna from the stealership. Fml.

Just get a new mast and rebuild your current antenna...

-Charlie

 

[madcanvis]

Wow that hilarious! Have you tried putting a screen on your intake either at the elbow or inside the fender? I'm assuming squirrels right?

Chipmunks! Do I have to take off the fender or just jam the screen in the intake hole on the side of the airbox?

TIA

 

[BunBun]

Plastidipped my wheels and bumpers

 

[camerondombi]

Plastidipped my wheels and bumpers

Don't forget the grille, it's looks great too!


2002 T4R 3" Rough Country suspension lift, K&N intake, Method Race wheels, 33" Mickey Thompson Mud Terrain, Savage off-road front winch bumper, Warn 9000lb winch, CBI ditch light brackets, KC ditch lights.

 

[kolelt]

Have to check my airbox as a weekly PM...How do I stop this madness??!!!
View attachment 225534
:cry2:

Your joking right? Lol. That's funny

 

[JBurt]

You can remove the air elbow without taking off the fender. After that you could probably rubberband a screen around your intake.

Or you could buy a snorkel!

Chipmunks! Do I have to take off the fender or just jam the screen in the intake hole on the side of the airbox?

TIA

 

[Pedrojr80]

Bought factory radio and climate control from toyota recyclers. Next, need to buy the retractable antenna from the stealership. Fml.

How much u got the radio for? And why not an aftermarket one?


Sent from my iPhone using Tapatalk

 

[Pedrojr80]

got my bumper a day early

Which bumper is that?


Sent from my iPhone using Tapatalk

 

[Pedrojr80]

Finishing one of my project of my new rig!

Sent from my iPhone using Tapatalk