theesotericone
New member
Damn it. Now I just ordered a Tundra brake kit from Amazon. Got the Power Stop KC2324 for $260 from Amazon warehouse. OK, I'm really done ordering shit for the next two months now. lol
What Did You Do To Your 3rd Gen Today?
- Thread starter pin8246
- Start date
- Status
Mark_BC
Senior Member
Awesome I'm planning to do that, what paints did you use for rust preventer and liner?
tjaguilar
New member
uberjeff
New member
I picked up a set in gunmetal today from discounttiredirect.com. $125 ea. That will be my project for next weekend.
reelamin
New member
Duuuude!!! I love your front yard...screw keeping up with the neighbor's...I'm doing my own thing!! So with you!...TELL THOSE F'S TO COME TAKE CARE OF IT AND PAY FOR THE BILL !! YARD WORK SUCKS DIRTY BUNG HOLES AFTER A DIARIAH EXPLOSION!!!!
inneyeseakay
New member
Found the problem with my factory installed auto-start module with my TDS system and fixed it. Now my remote start is working!
[Video]https://vid.me/1WWh[/video]
Sent from my Pixel using Tapatalk
[Video]https://vid.me/1WWh[/video]
Sent from my Pixel using Tapatalk
JayRolla
New member
That part is wife's flower garden. Will be full of flowers in few weeks. Shit the grass part is already green!
nwebb01
New member
I used rust oleum rust reformer for the base layer. Not sure what I'll use for the final coat tonight.
Sent from my Nexus 6 using Tapatalk
inneyeseakay
New member
Got my front windows tinted
Sent from my Pixel using Tapatalk
Sent from my Pixel using Tapatalk
tjaguilar
New member
Got my front windows tinted
Sent from my Pixel using Tapatalk
Did you leave the rears factory tint?
inneyeseakay
New member
Rwhockey29
New member
did some more work on my rear storage/sleeping platform. glued a piece of 1/2" plywood to the top of the drawers and the slide out for sleeping
used this locktite glue, works great and held almost instantly
slide out:
test fitting the main section
slide out stored away(still have full function of rear seats)
slide pulled out, seats stored, ready to sleep!
i picked up some 5lb foam padding and outdoor carpet that will be going over the top of both. still need to drill holes for the turnbuckles to secure it as well. saved a bunch of weight going the wood/metal frame route, pretty sure my main section weight under 25 lbs. i can easily pull it out and carry with one hand.
used this locktite glue, works great and held almost instantly
slide out:
test fitting the main section
slide out stored away(still have full function of rear seats)
slide pulled out, seats stored, ready to sleep!
i picked up some 5lb foam padding and outdoor carpet that will be going over the top of both. still need to drill holes for the turnbuckles to secure it as well. saved a bunch of weight going the wood/metal frame route, pretty sure my main section weight under 25 lbs. i can easily pull it out and carry with one hand.
Some of the best mods of the forum deserve repeating.
Sent from my iPhone using Tapatalk
That outlet was well made by Toyota lol
I went 30 over factory and 40 over front
carthy8604
New member
First real introduction post here, been a lurker for a while. This past weekend I picked up some new wheels and tires for my 3rd Gen.
Sent from my SAMSUNG-SM-G890A using Tapatalk
Sent from my SAMSUNG-SM-G890A using Tapatalk
michaeljtomey
New member
Day one complete. Never again will I do retrofits. This is not a fun project. [emoji25]
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Put on some Bilstien 5100 fronts with OME 906 Rear coils
I just put on some OME 906 rear coils with factory Bilstein FJ80 shocks, which were recommended by a mechanic I was talking to as a less expensive option. The rear shocks are a little to long for the coils so I could have a problem of them coming lose while on rough terrain. I put on Bilstein 5100 in the front with around a 2" lift, the rear coils are supposed to be at 2"s as well but after measuring the front sits about an inch higher. Im trying to locate some spacers for the rear to raise it an inch, leveling it out verse lowering the front a clip since the rear spacers might fix my issue with the rear shocks and I won't have to go with limiter straps. Anyone know where I could find these? I can't seem to.
I just put on some OME 906 rear coils with factory Bilstein FJ80 shocks, which were recommended by a mechanic I was talking to as a less expensive option. The rear shocks are a little to long for the coils so I could have a problem of them coming lose while on rough terrain. I put on Bilstein 5100 in the front with around a 2" lift, the rear coils are supposed to be at 2"s as well but after measuring the front sits about an inch higher. Im trying to locate some spacers for the rear to raise it an inch, leveling it out verse lowering the front a clip since the rear spacers might fix my issue with the rear shocks and I won't have to go with limiter straps. Anyone know where I could find these? I can't seem to.
- Status
Similar threads
