What Did You Do To Your 3rd Gen Today?

[2TH4IST]

Snapped my addco 1" solid rear swaybar. Don't know when it happened or how.

 

[spartacus]

Snapped my addco 1" solid rear swaybar. Don't know when it happened or how.

That's a surprise. Add co is beefier then stock.

 

[1blink]

Ordered her some goodies from ECGS. I've put off regearing too long. 4.88 gears and Harrup elocker on the way!

 

[JWaldz]

V2 merged with original and unlocked. Proceed as normal!

 

[Posty]

Added a little jumper hose for compressor quick connect, I didn't like how the original position pointed my hose toward the engine.

Before:

After:

Happy with the results...we'll see how long the poly hose holds up

 

[raKnizek]

Preparing for a supercharger instal. Injectors are being cleaned. Here I removed the old plastic harness covers, wrapped the harness with Tesa tape, and installed aluminum brackets/covers.

Next the injectors go back in, new colder plugs, and a fresh fuel filter.

 

[JustTroItIn]

Fluid Film treatment of the frame and under carriage in preparation for winter.

 

[4RunAffairs]

Finished a working prototype for an inclinometer dev project I’ve been thinking about for a couple years now! Always wished the 3rd gens had them. I installed the overhead monitor 4-5 years ago and now I need even more green and amber lights. In other words, more cowbell.

Also finished the design for the screen, it will look a little more like the VFD lights of the overhead unit once the new screen arrives.