What Did You Do To Your 3rd Gen Today?

[jmt2404]

I cut and put terminals on the 4awg wire i got to finally install my dual batteries and to do the "big 3" mod.

also picked up a bunch of random gaskets and a new radiator... and monday everything will go in, including the new (to me) engine.

 

[A.Wilson013]

I cut and put terminals on the 4awg wire i got to finally install my dual batteries and to do the "big 3" mod.

also picked up a bunch of random gaskets and a new radiator... and monday everything will go in, including the new (to me) engine.

Hey bro, want a hand Monday? I am going to cut out around noon...

Today I wired a 9 pin female serial plug to my glove box, connected to my AEM Uego so that I can data log my AF ratio's! All in all it was very simple, and cheap! Total cost, with wire, heat shrink, and 2 serial plugs was about $10.

 

[Zachpins34]

plasti dipped my license plate housing.

 

[jmt2404]

Hey bro, want a hand Monday? I am going to cut out around noon...
QUOTE]

Ill let you know bro, monday is the first day the wife goes back to work and I'll have abby then. I may need to get a sitter so we can work on the truck lol...

 

[Mellow77]

Detailed the old girl yesterday. This morning I looked outside and realized rain was on the way.....rode her like a show pony for the 40 mile commute to work and into the parking garage. I then prayed the rain would be gone by the time I was ready to leave.

No Dice; she's gonna get dirty on the way home. :dammit: :ybrick:

 

[Kurtis]

Fabricated a better antenna mount and washed it.

 

[The97Runner]

Admired the crap out of it.

 

[fightman80]

Built my Panhard drop bracket!

I should add, without Ripcord's help with the dimensions, I would have not been able to do this mod.....thanks man!

 

[kingwilliam]

Fit it into my garage!

 

[sprchrgd_4x4runner]

I should add, without Ripcord's help with the dimensions, I would have not been able to do this mod.....thanks man!

I need this, anybody want to pass the dimensions to me? Ripcord perhaps.

 

[sprchrgd_4x4runner]

before

after

Installed the LC coils in the back now I have a 4 inch lift with the rancho shocka and 2 1/5 in the front I need the trd tundra coils, also painted the valve covers white lol rsplaces thw valve cover gaskets

 

[4-Ripcord]

I need this, anybody want to pass the dimensions to me? Ripcord perhaps.

Off the top pf my head i want to say its 3/16" steel and 2.25" between hole centers. The numbers are in my messages inbox and im on my phone and lazy. Maybe fightman can chime in to confirm the numbers.

 

[kolbydmc]

Wait for it to get out of the body shop and find out I need wheel cylinders.

 

[twitchee2]

i wouldnt say what i did today but over the last 4 days i put 1200 miles on it, frist drove from chico to LA with about 400lbs + 1200lb jetski trailer. next day drove 4 people plus ski gear, stuff and food for 3 days to go to mammoth and back.

 

[RHeld24]

Smogged. Passed CA emissions test. Not bad for a 15 yr old truck with 245k and the original cat...

 

[TFJ-4runner]

Fixed the source of the water leaking into the interior from the sunroof issue.

 

[Mudtallica]

Fixin' to do a TB/WP change, install new rad, install new Airraid tube, remove elbow in the fender, do DP mod, & install some LED interior bulbs...

 

[steezemcqueen]

nothing as i am currently 2000 miles away from it

 

[Avarice]

Ran mine out of gas 10 km away from Banff coming back from Louise. Broken gas gauges suck. On the plus side, AMA only took 45min and I had my iPhone to keep me entertained.

 

[Wizzle]

Finally got around to properly installing my stereo with butt connectors. I installed it rather quickly before a 12 hour trip this past summer and just used electrical tape. Nothing special, just gives me a little peace of mind.