What did you do with your 4runner today?

Velonici said:
I got this put on
20150404_155709_zpskw3c7xas.jpg~original


then started to work on the transfer case plate. I got the cross member on then I went to take off the tube supports. Then this happened
20150404_180616_zpsg1kx2flv.jpg~original


Thats right all 8 bolts broke. What was left was very badly corroded. Already broke 3 drill bits trying to drill new holes to tap. Also one of the bolt holes in the radiator support bracket for the front plate is completely stropped out. Going to either get a time-sert in there or might just get a longer bolt and put a nut on the top of it.
Click to expand...


Feel for you man.

I am still putting off drilling out the ONE I broken on my skid plates. I broke like 5 drill bits And hung it up.

I have left handed bits ready to roll.

Hope you get them. Take your time.
 
Velonici said:
I got this put on
20150404_155709_zpskw3c7xas.jpg~original


then started to work on the transfer case plate. I got the cross member on then I went to take off the tube supports. Then this happened
20150404_180616_zpsg1kx2flv.jpg~original


Thats right all 8 bolts broke. What was left was very badly corroded. Already broke 3 drill bits trying to drill new holes to tap. Also one of the bolt holes in the radiator support bracket for the front plate is completely stropped out. Going to either get a time-sert in there or might just get a longer bolt and put a nut on the top of it.
Click to expand...


Feel for you man.

I am still putting off drilling out the ONE I broken on my skid plates. I broke like 5 drill bits And hung it up.

I have left handed bits ready to roll.

Hope you get them. Take your time.
 
Took the rear plastic bumper cover off to get a better look on the inside you might say.
Thinking on a possible next project, little more challenging.


IMG_20150405_110903.jpg
 

Attachments

  • IMG_20150405_110903.jpg
    IMG_20150405_110903.jpg
    120.5 KB · Views: 532
emelianenkov said:
Upgraded stock components to something a little more lively....

Loving my FJ. The aftermarket is incredible for this! Light bar mounts cost me $90, installed in 10 minutes, and work perfectly.


Got a front bumper for $500, snorkel, 5 piece budbuilts ($1060 new plus powder coat, paid $500), All Pro uniball UCAs ($600-700 new, paid $50 plus $178 for new uniballs and hardware), and a whole bunch of other things for a steep discount off fellow FJ owners. Can't freakin complain!

Only things I miss about my 4R:
Sunroof
Rear window
The headers and y-pipe I put on it...
Click to expand...

> Toyota FJ Cruiser Community <

lol jk, looks good
 
LTDSC said:
because he has one.

I havent seen an FJ come with a 4.7 yet. Until then, invalid.
Click to expand...

you didn't see the limited production v8 model?

<iframe width="560" height="315" src="https://www.youtube.com/embed/V67D35j1Elw" frameborder="0" allowfullscreen></iframe>
 
Cleaned MAF sensor, cleaned and polished throttle body, and a clean six and half quarts of Mobil1.
 

Attachments

  • 2015-04-05 23.03.31.jpg
    2015-04-05 23.03.31.jpg
    141.2 KB · Views: 566
You must log in or register to reply here.

Similar threads

F
Extended Lower Control Arms for 4th Gen?
Replies
4
Views
45K
aemravan
A
0
New 03 4.7 with over 300k miles questions.
Replies
19
Views
3K
04run&gun
0
B
Opinions needed related to my fuel pressure loss vapor lock issue..
Replies
12
Views
4K
JustTroItIn
JustTroItIn
T
2001 4runner Head Gasket Replacement
Replies
19
Views
16K
alia176
A
F
3rd gen 4runner cooling question.
Replies
19
Views
4K
gh25_
gh25_

Members online

Total: 548 (members: 1, guests: 547)

Forum statistics

Threads
278,316
Messages
3,554,113
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top