bamma
New member
Pretty simple. I have an aftermarket deck, so the audio plug went straight to my deck. I spliced into the cigarette kit plug for power to the charging only plug.
What did you do with your 4runner today?
- Thread starter NorthGa4R
- Start date
Pretty simple. I have an aftermarket deck, so the audio plug went straight to my deck. I spliced into the cigarette kit plug for power to the charging only plug.
Net4n6
New member
Where did you purchase the "kit"?
Billynath1988
Senior Member
Light trails
i got the permit too!! i just havent had the time to go and explore, lol
riere77
New member
That's all I've been doing ....this my first year with the permits all my free time and tire treads are being spent on checking out these spots
Put a new set of cooper discoverer at3s on it. White Letters out! I like the look, we'll see how they wear. They're more quiet than the duelers that came on the runner, but they don't ride as smooth as my old tacoma's michelins.
They were, however, about 330 bucks cheaper as a set.
They were, however, about 330 bucks cheaper as a set.
tucktuck8
New member
bamma
New member
Got it off ebay. Search for 4runner usb. Make sure the plug is about 55mm long. Not going to post the link where I bought it as the one I purchased from a colorado seller appeared to be used, and the seller would not work with me regarding a solution. Do not want to give him any more business...
This appears to be the same one:
http://www.ebay.com/itm/Power-Outle...ner-/261883587997?hash=item3cf97a6d9d&vxp=mtr
Last edited:
Sporin
New member
Planning to drop my skidplates to clean up and repaint. Then some sort of oil/wax coating on my surface-rusty frame before reassembling.
Any tips? All the bolts for my sidesteps came out no problem so I'm hoping not to snap off any/too many of the skidplates bolts. Figure I'll hit them all width PB Blaster a few times before I do it.
Any tips? All the bolts for my sidesteps came out no problem so I'm hoping not to snap off any/too many of the skidplates bolts. Figure I'll hit them all width PB Blaster a few times before I do it.
NuclearN8
New member
sounds like you need a gallon of fluid film to brush on the frame semiannually.
Sporin
New member
Thank you. It's an old truck with a lot of miles but it's pretty solid and I'd like to keep it from deteriorating too badly so I can hand it down to my son in a few years. It will make a good "first car" for him and I can replace it with a clean, Southern V8.
tH1e swiN1e
New member
Replace my Camburg UCA uniballs and got my 255/80 ST Maxx's mounted. Coming from 285/70 they definitely dont have the stance, but they look awesome and I can feel the weight difference in the steering. Ive only driven 20 miles but I like them so far.
Also took delivery of this awesomeness. WARNING: LED PORN
Also took delivery of this awesomeness. WARNING: LED PORN
I am currently running a Kenwood DNX572BH, Rockford Fosgate's new marine amps, the PM600X4, and the PM1000x1bd, those are powering my Rockford T1675 in the front, JL evolution XR650 in the back, and a Kicker Comprt gen 1. I installed the 360 last night and it really woke everything up, the adjustability is sooo nice. Hardest part was finding some place to stuff it, everything is installed stealthy, amps are under the front seats, the 360 had to go where the factory nav unit was, everything else is mounted in stock locations behind stock grills along with a crap ton of dynamat. I originally wanted to use that area for storage but it was worth sacrificing the lost space.
I am an installer by profession and this is going into my daily driver, so I wanted something at least decent. I do like the MB's, maxxsonics put out some nice product. Their headquarters is like 20 minutes from my house.
alaskaman
Senior Member
We put in new brighter lights in the map lights, dome lights forward and rear, front door lights, and new bulbs to the rear license plate lights and front parking lights.
Yesterday we had the headlights resurfaced to get them cleaned up. Will post a pic or two when it gets dark here.
Yesterday we had the headlights resurfaced to get them cleaned up. Will post a pic or two when it gets dark here.
Similar threads
