What did you do with your 4runner today?

[Mac78610]

Installed Oracle halo headlight assemblies, HID low beams (4300K) and FOGS (3000K).

 

[T4RVB]

40inch light bar and rear spotlights! This is while getting everything hooked up so wires werent tucked in yet.

 

[HNDFL]

You can purchase just the headlight lens? For 06_09, where?

I meant to put assembly not just lenses let me fix that.

 

[FoxNJ]

Loving the TPMS bypass mod I just finished.

And currently in the middle of re-plasti dipping my grille. And just a heads up for anyone looking to take off plasti dip that was applied too thin, use WD40, not goo gone like some suggest.

 

[wnelax04sr5]

urban runner tubular rack installed

 

[yotaguy674]

Lamin-x yellow fog light covers installed.

 

[tucktuck8]

You use the Apple lightning cord. I have CarPlay and haven't really been too impressed, maybe used it twice since I've had it installed.

I guess I just prefer Bluetooth, but the headunits are nice.. so its a nice bonus

Same for me. I have the CarPlay but have been using the bluetooth way more. They are coming out with an update that allows CarPlay over bluetooth. Should be nicer to use then.

 

[97BlackAckCL]

Truck finally going into paint today! Should have her back on Tuesday

Can't believe I've been without her for a month already
:wow:

 

[rich045]

Also met up with Harrison [MENTION=95314]03 T4R Limited[/MENTION] to check out his build and shoot the breeze. Great guy with a good looking build!











Thanks again for meeting up. Great to meet you man!

that rear tire mount!!! i want!!! where or how did he get it mounted?!?! more info please!!! doesnt matter if it needs to be fabricated cause thats something i can do.

 

[wadle5]

So I may be having another add on to the truck. . .

 

[wkeryder4]

that rear tire mount!!! i want!!! where or how did he get it mounted?!?! more info please!!! doesnt matter if it needs to be fabricated cause thats something i can do.

Looks like a Hitch Gate tire carrier or something similar. Just goes into the factory hitch.

 

[momo.75]

that rear tire mount!!! i want!!! where or how did he get it mounted?!?! more info please!!! doesnt matter if it needs to be fabricated cause thats something i can do.

It is welded to the ends of the frame rails. He just had to make small cuts through the bumper. It was really well built

 

[rich045]

It is welded to the ends of the frame rails. He just had to make small cuts through the bumper. It was really well built

can you get any closer pics? especially on the points where it meets the body? I've been dying to make one but i want it to make it clean and his looks the best thus far! thanks!

 

[momo.75]

I am not with Harrison ( [MENTION=95314]03 T4R Limited[/MENTION] ) any more but maybe he can post what you are looking for.

 

[Desert Fox]

Have anymore pics? Maybe some of the final product with the bumper cover on it ?

I could not place the winch control box in a good place. So I took the cover off of it and mounted it to the Bud Built winch plate. I covered the electrical contacts with liquid electrical tape. I put the winch control plug on the top of the bumper cover.


Ooops my license plate is exposed. Now you can recognize my 4Runner

 

[850lifeguard]

Planned a trip to Chassahowitzka wildlife refuge this weekend with the boat but got rained out.. So we switch directions last minute and are heading up to the mountains for some camping!

But after we got all the gear in the runner it is easy to see the FJ rear spring are not going to cut it. Defiantly going to be upgraded. I'm thinking OME 895's. Anyone have some feedback on them?

 

[Mytoy4]

I could not place the winch control box in a good place. So I took the cover off of it and mounted it to the Bud Built winch plate. I covered the electrical contacts with liquid electrical tape. I put the winch control plug on the top of the bumper cover.


Ooops my license plate is exposed. Now you can recognize my 4Runner

Want!

 

[jmoskow]

Installed Old Man Emu Lift. And BFG All Terrain KO2 in 275/70r17

VIDEO:

https://www.youtube.com/watch?v=aoHzvCJaqfM

I made a video explaining what parts I bought and why.

 

[montana_jeepn]

Installed Old Man Emu Lift. And BFG All Terrain KO2 in 275/70r17

VIDEO:

https://www.youtube.com/watch?v=aoHzvCJaqfM

I made a video explaining what parts I bought and why.

Looks great! Any rubbing or trimming required?

 

[jmoskow]

Looks great! Any rubbing or trimming required?

Small amount of rubbing on the front inner fender liner at full lock. On the "triangles" as they say. No big deal. Easily fixed, I'm sure. I'll post photos. But I still need to install the spidertrax 1.25in spacers. From what I've gathered, those might increase rubbing in some areas.