What did you do with your 4runner today?

Both of them..

Gave both of my ladies got a bath and a detail, were lookin like filthy whores.

image.jpg
 

Attachments

  • image.jpg
    image.jpg
    136.3 KB · Views: 675
Oneluv13T4R said:
Gave both of my ladies got a bath and a detail, were lookin like filthy whores.
Click to expand...

Rain must not have made it down that far? My Tacoma and 4runner are both a muddy mess right now. Rained just enough to get rid of the top layer of dust, but not enough to clean them.
 
ExpeditionBill said:
I'm getting a bigger 3 ton jack and jack stands before the weekend to finally do mine. You should too.
Click to expand...

I got a powerbuilt 3ton unijack that works really well for doing 1 side but 4 of them would be a bit too much for my budget. I'm looking into finding some decent cheap 3t jackstands.
 
Darn Bulbs in the Air Conditioning Cluster

I replaced all three of the bulbs for the air conditioning controls because they decided to go out on me!:violin:
 
Muskie95 said:
I replaced all three of the bulbs for the air conditioning controls because they decided to go out on me!:violin:
Click to expand...

This is on my list to do this weekend. They've been burned out since I bought it but it hasn't bothered me enough to care. Now that it's dark when I'm driving home, it's time to do it.
 
ExpeditionBill said:
Hey Bill, did you order a cushion or make your own? Mine is a bit worn down also from previous owner getting in and out.

Where about in NJ are you? Noticed a lot of NJ guys on here.
Click to expand...

I am in Morristown Area and I ordered the OEM seat cushion from a Toyota dealership online. It was around $140 shipped to me.

Bill
 
Btw is there a safe middle front jacking point? I could jack the rear by placing the jack under the diff, but what about the front? Do I have to do it one side at a time?
 
4Rnr4Evr said:
Btw is there a safe middle front jacking point? I could jack the rear by placing the jack under the diff, but what about the front? Do I have to do it one side at a time?
Click to expand...

There's a spot right in front of the skid plate (not the filler plate) in the middle that I jacked up from. It's a pretty obvious spot.
 
Finally replaced the driver side abs sensor wire today after I did the lift and broke it..strange thing is I did exhaust about 2 months ago, magnaflow stainless muffler, turned it out the side behind the tire ect..when I did about 4 or 5 days later the check engine, vsc, Trac lights came on and have been on..then a couple weeks ago did the lift and screwed up the abs wire and since the abs lights been on..Now I just replaced the abs wire and soon as I drove it a mile or so all the lights went off..I'm a happy camper!
 
Today I parked in my regular spot at school and then while getting a quote on some repairs saw ants on my front end and inside the headlight casings. :crybaby: I already had this problem with a passenger door where I was killing 5 or so ants each day on my way to school (20 min drive) at which point I sprayed my entire car with Raid Home Defense so looks like I'll be doing that again tomorrow. From now on I'm only parking on concrete no more gravel.
 
Well let's see I took of the steps mirrors, spoilers and middle bumper. The mirrors, spoilers and bumper will be painted black. Also wiring in flush mount less into the bumper. Pics to follow.
 
You must log in or register to reply here.

Similar threads

F
Extended Lower Control Arms for 4th Gen?
Replies
4
Views
45K
aemravan
A
0
New 03 4.7 with over 300k miles questions.
Replies
19
Views
3K
04run&gun
0
B
Opinions needed related to my fuel pressure loss vapor lock issue..
Replies
12
Views
4K
JustTroItIn
JustTroItIn
T
2001 4runner Head Gasket Replacement
Replies
19
Views
16K
alia176
A
F
3rd gen 4runner cooling question.
Replies
19
Views
4K
gh25_
gh25_

Members online

Total: 614 (members: 2, guests: 612)

Forum statistics

Threads
278,316
Messages
3,554,113
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top