Where to measure "level"

[tpirman]

I know "level" is sometimes in the eye of the beholder, but does anyone have any suggestions on defined measure points front and back that would tell the installer the truck is level? I have Bilstein 5100s all around, OME 895E on the back and adjustable Toytecs on the front. All installed but there is too much of a rake because I requested that not knowing that the 895s took YEARS to settle, not days. So going in for an adjustment tomorrow and hoping to give my installer some tips.

Any help would be appreciated! TIA

 

[eddiebx]

Maybe at the frame rails?

 

[<<<<]

Can't stand that "level" look. Factory rake is just right. My 0.02$

 

[KCcarguy]

I used the frame rails. It looks best IMO and retains a slight "factory rake"

 

[tpirman]

Maybe at the frame rails?

I used the frame rails. It looks best IMO and retains a slight "factory rake"

Ok, good advice, and that is easy enough to test too. I can use a jack and a level to see if that would be a good way to get it across to my installer and please my eye too.

Thanks.