Will -12 Offset Wheels fit :/ ?

[nowashburn]

2000 Limited 4runner with 3in Rough Country suspension lift. Looking to run 285/75 R16 BFGoodrich AT's.

I love these rims, but at 16x9 and a -12 offset, will the y rub even with my 3in lift:

https://www.tirerack.com/wheels/Whe...Runner+Limited+4wd&autoYear=2000&autoModClar=

Thanks!

 

[Link12]

2000 Limited 4runner with 3in Rough Country suspension lift. Looking to run 285/75 R16 BFGoodrich AT's.

I love these rims, but at 16x9 and a -12 offset, will the y rub even with my 3in lift:

https://www.tirerack.com/wheels/Whe...Runner+Limited+4wd&autoYear=2000&autoModClar=

Thanks!

My guess would be yes. I ran 255/80r17's with 17x8 -10 offset and i had to do some trimming and it still would rub with the Toytec ultimate lift. My tires would be .3" taller and about a 1" narrower than the ones you want to run.

 

[nowashburn]

Thanks, that answers it for me. Think I'm going to go with American Racing AX199 MOJAVE II 16x8 0mm:

https://www.tirerack.com/wheels/WheelCloseUpServlet?&target=runWheelSearch&autoMake=Toyota&autoModel=4Runner+Limited+4wd&autoYear=2000&autoModClar=&initialPartNumber=AX19968060700B&i1_Qty=4&wheelMake=ATX&wheelModel=AX199+Mojave+II&wheelFinish=Black+Painted&wheelFinish=Black+Painted&showRear=no&packageFlow=false

I doubt I will get much rubbing, if any with those. I can always bump them out a bit with spacers to make up for the 0 offset. Thanks!

 

[thecole1098]

You should be fine with those. I have a 2" lift with 33" tires and that offset and it rubs slightly when turning all the way. Hopefully once I get my new Toytec lift kit it will fix the rubbing for me.

 

[nowashburn]

Thanks for everyones input. I ended up getting a different wheel:

Level 8
MK6
16 X8 6-139.70 -10 BKMTXX

https://www.discounttiredirect.com/buy-wheels/level-8-mk6/p/16136

I figure that would be much safer to avoid rubbing. If I want to widen the stance I can always shell out a few bucks for 1 to 1.25 wheel space adaptors to make up for the extra inch+.