jrandom
New member
Regardless, what do you do on vehicles that don't ww de-icers?
Make sure you have a winter wiper blade, particularly the blades that have covers over the frames (just image search winter wiper blade) so ice doesn't build up in between all of the flexible sections and joints of the frame.
Second (as mentioned) full winter de-ice type fluid with an extra bottle in the back, just because you always run out at the worst possible time.
Third leave the defroster on high always, if it gets to warm crack the windows, LOL or vice versa keep the inside of you car the same temp as the outside and the snow just won't melt, of course unless it is more like sleet or warmer climate wet snow.
Fourth to get rid of the ice that is already there (while driving at a safe speed if moving), roll down the window, sweep your hand down the side of the windshield to get rid of any build-up on the side. Next with the wipers on, time the wiper, rest thumb on the windshield, let the blade bump into it, and gently flick it outward away from the windshield as it just departs the apex. Done correctly, this should lift the wiper off the windshield just enough to cause the tension spring to "flap" the wiper back down against the windshield knocking off said ice build up. It takes some practice and a little technique to get it just right but it works great. You don't have to reach out as far doing it this way as when the wiper is at rest. The passenger side is a little more difficult as it requires a longer reach and the wiper is generally in the down or near down position.
Last edited: