Wiring turn lights with ARB bumper

[Montana Medic]

So trying to rewire turn signal lights with the bumper. OEM wiring has two wires, red and white. Light assembly that cam with the ARB has four wires. Red, green and black x2. I thought i had wiring correct until i finished second light. It tested fine but blew fuse. Now right one will work half time, left never and of course flashers dont work. Obviously i have it wired wrong. Any idea how i need to wire it. Thanks

 

[tpotnoc]

So trying to rewire turn signal lights with the bumper. OEM wiring has two wires, red and white. Light assembly that cam with the ARB has four wires. Red, green and black x2. I thought i had wiring correct until i finished second light. It tested fine but blew fuse. Now right one will work half time, left never and of course flashers dont work. Obviously i have it wired wrong. Any idea how i need to wire it. Thanks

Ever figure this out?

 

[frostyflammable]

My guess is that the blacks are shared ground, and one of the wires (red or green) is signal the other is parking lights. I know this thread is old but hoping the OP does come back and update. Really hoping it came with a wiring diagram as well.

Thanks!