Would you guys with the Pro be interested in a levelling spring?

[Ryan at Eibach]

Thoughts? We could certainly make it happen.

reply 294 on this post promted this:

https://www.toyota-4runner.org/5th-gen-t4rs/253184-eibach-pro-truck-lift-20.html

Ryan

 

[Lostmanifesto]

I am as I mentioned in the other thread. Specifically, for the 2019 PRO. The suspension is completely different from previous year PRO models.

 

[Ryan at Eibach]

I am as I mentioned in the other thread. Specifically, for the 2019 PRO. The suspension is completely different from previous year PRO models.

I know. We supplied Bilstein and now supply Fox. We'd start with 19 and work backwards.

Ryan

 

[spoonmectr]

I certainly would be interested. It’s so annoying that the Pro sits an inch higher in the the front than other trims but it is still 2” lower than the rear!

 

[2barevo]

Thoughts? We could certainly make it happen.

reply 294 on this post promted this:

Eibach Pro-truck lift

Ryan

Ryan, aren't the FJ TRD springs an inch higher when installed on the 4Runner?

 

[Ryan at Eibach]

Ryan, aren't the FJ TRD springs an inch higher when installed on the 4Runner?

I couldn't tell you for certain.

 

[ysasi]

I'm interested.

 

[Endlessearth]

Interested.

 

[CRB Racing]

If you make it, I’ll order it.

 

[Bayou_Pro]

Ryan, aren't the FJ TRD springs an inch higher when installed on the 4Runner?

You'll get closer to 2" of lift with those springs on a TRD Pro 4runner. They are 1" longer then the Pro springs and 600#. Pretty much the same spring that the Bilstein 6112s come with. I have a set of those about to go on my Pro.

 

[White19TRDPRO]

Interested.

 

[Sparman]

Interested - for an '18.

Thanks

 

[wsgoat]

Interested as well.

 

[TCLLC]

curious... for a 17

 

[Hans Moleman]

Would it be possible for you to make a 15" long x 3" ID x 600lb coil spring? This is for the FJ TRD Bilstein 6112 that originally came with 14" long x 580lb springs. I'm looking to gain an additional 1" to 2" of lift and I don't want to use spacers or a heavier spring to compromise the ride.

 

[redneckj]

I couldn't tell you for certain.

Didn't Eibach make the springs?

 

[CavPro]

Didn't Eibach make the springs?

Funniest part of this thread.

 

[20164runner]

I'd love for you guys to make the pro springs with a higher spring/lb rating. I'm getting a full front bumper replacement and I want to keep it level.

 

[Bayou_Pro]

I'd love for you guys to make the pro springs with a higher spring/lb rating. I'm getting a full front bumper replacement and I want to keep it level.

Just get a 13"x3" 600# coilover spring you have exactly what you are asking for.


Sent from my iPhone using Tapatalk

 

[Flea7907]

Sign me up, if you make I will buy it