zstampe
New member
Yeah, 30 mins or so? It was super easy, I removed the OEM lights and drilled a hole for the mount for the new lights and bolted em in. The wiring I did a quick soldering job and just used the stock wiring. Super easy install.
Zstampe's OFFICIAL build thread finally!
- Thread starter zstampe
- Start date
Yeah, 30 mins or so? It was super easy, I removed the OEM lights and drilled a hole for the mount for the new lights and bolted em in. The wiring I did a quick soldering job and just used the stock wiring. Super easy install.
philskeeter
New member
Do you take the housing out only? or do you also take the flood lenses out too?
zstampe
New member
AfroWookie
New member
Hey, I know you don't have the truck anymore, but did you have any issues running those wide tires on the stock wheels? I just picked up a used set (less than 5000 miles) of BFG All Terrains that same size and was osdering how they'd work on the stockies. Are wheel spacers a must to keep from hitting the control arm?
Stuck CAPS
New member
I'm back in a Toyota in case any of you missed it!
Since you're in a camry, and since you did have some LED lighting outfitting on your 4R, I assume you had some switches for them. Do you by chance have one of the dead panels lying around somewhere? Whether or not you do, could you tell me whether or not you think that the camry's VSC off switch would fit in one of the 4R spaces?
zstampe
New member
Some of you guys liked the photos I take so I took some of my new car I thought I would share. On a side note, Katie will be done with school in December and I have already been looking at 4th ang 5th gens from time to time. I've also been looking at FJ's. I'll be back here with a 4x4 Toyota at some point I hope....until then.......
jaybird93000
New member
Camry looks great man! Love that paint color, and the yellow fogs of course :clap2:
Captain Texas
New member
Here is what I did with my Rola, sold it on craigslist so the dude could put it on this peach....
Here is what she looked like after that and what she looks like now...
And this is what I ordered today.
And as stated earlier there will be plenty more to come!!
ZS
:bravo:
How easy was it to install the Baja Rack? Also would you recommend it? Planning on buying one.
He's been gone for a while, so I'll help you out. The BajaRack install takes 30 min. Remove stock rack, clean roof area. You need two people to get it in place properly. Then just tighten bolts and call it a day.
Captain Texas
New member
Awesome. Thanks! I'll be ordering mine soon!
KingGeorge
New member
When you pulled your front spacer how big was that spacer?
aha2988
New member
zstampe's been gone for a while fellas, sold his rig a while back and purchase the vehicle posted in a few posts up. noticed no ones answered ya so I figured I'd just spell it out. ollyboy, I notice your in NC, feel free to PM me any questions you might have on 4runners or if you need any mechanic work/ help etc.
Last edited:
trailsurfer92
New member
Oh man I'm new here but sad to see this 4Runner go... This will definitely be one of my main sources of inspiration.
jonathansdotson
New member
Anyone have any insight as to how he mounted those Rigids as his fog lights? I haven't seen any other rigs that have it done.
S p a r k y
New member
[MENTION=93434]gshadow325[/MENTION]
momo.75
Registered User
Knowing Zach he probably used duct tape and bread twisties.....
Sworkscrux
New member
Your truck looks sweet. I just picked up a 2008 limited and I'm super excited to start on the journey 
LordAbdullah
New member
*reads entire build thread*
*OP sells truck 80% of way through*
this happens way too frequently after reading entire build threads!!!!
*OP sells truck 80% of way through*
this happens way too frequently after reading entire build threads!!!!
