User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 02-04-2020, 06:23 PM #16
jcaino jcaino is offline
Member
 
Join Date: Sep 2018
Location: Pittsburgh
Posts: 212
jcaino will become famous soon enough jcaino will become famous soon enough
jcaino jcaino is offline
Member
 
Join Date: Sep 2018
Location: Pittsburgh
Posts: 212
jcaino will become famous soon enough jcaino will become famous soon enough
Quote:
Originally Posted by gfxcruncher View Post
Hey man! I haven't been out since I met you over the holidays... I'm way overdue for a trip!

I like the idea of having a pull out table... sleeping at the wheel well height gives me just enough headroom to move around pretty comfortably and didn't want to sacrifice the drawer height.

Yeah, since you're doing your own wrenching and are handy, you should get a welder, really opens up the possibilities of what you can put together. I've been using this Vucan Welder from Harbor Freight. Works better using 220 and honestly, I've only been using the presets instead of manually dialing it in.

Sorry, already promised the winch mount to another buddy...
That's one of the ones I've been eyeing up - but of course one project leads to another and I'll have to run a 220 line into the garage. Not a huge deal, just something else to do!

No worries about the winch mount, just another good excuse for me to roll me own...though, Liv is pushing for a full bumper, sooo....

Did make some good progress on the drawer setup today, got the carcass built along with the drawers - slides got delivered, so next is getting them mounted up and painting everything.

We've just done some fire roads and stuff since, but itching to get back out, might be starting a new job in a week or 2, so might try to get a few day trip in down to WV/VA before then....
__________________
2003 Galactic Gray Mica Limited V8
Inside: Pioneer AVH-2300NEX w/ backup cam | Dometic CFX3 55im | Custom floor w/ table & drawers
Outside: Hefty Fab Bumper | Warn ZR 10-S | RCI skids & sliders
Electrical: 150w solar panel | Victron MPPT controller | BlueSea breakers and panels
Suspension & Tires: Bilstein 5100's w/ Dobinson c59-314 & c59-329 | 5th Gen Trail wheels & Wildpeak A/T3W 275/70/17
jcaino is offline   Reply With QuoteReply With Quote
Old 02-05-2020, 12:16 AM #17
gfxcruncher's Avatar
gfxcruncher gfxcruncher is offline
Member
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
gfxcruncher gfxcruncher is offline
Member
gfxcruncher's Avatar
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
Quote:
Originally Posted by jcaino View Post
That's one of the ones I've been eyeing up - but of course one project leads to another and I'll have to run a 220 line into the garage. Not a huge deal, just something else to do!



No worries about the winch mount, just another good excuse for me to roll me own...though, Liv is pushing for a full bumper, sooo....



Did make some good progress on the drawer setup today, got the carcass built along with the drawers - slides got delivered, so next is getting them mounted up and painting everything.



We've just done some fire roads and stuff since, but itching to get back out, might be starting a new job in a week or 2, so might try to get a few day trip in down to WV/VA before then....


Good deal. Looking forward to seeing what you did with your setup next time we meet up, that chuck box you got is sweet.
And good luck with the new job gfxcruncher's build/adventures


Sent from my iPhone using Tapatalk
__________________
2007 SR5 4WD Nautical Blue -- Build Thread
gfxcruncher is offline   Reply With QuoteReply With Quote
Old 02-06-2020, 12:42 AM #18
gfxcruncher's Avatar
gfxcruncher gfxcruncher is offline
Member
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
gfxcruncher gfxcruncher is offline
Member
gfxcruncher's Avatar
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
DIY Rear Swingouts

A few people have asked for a writeup on this... I’ve said I’m not a photographer and I’m seeing now that I’m not much of a writer either, lol.

Project Background: I looked around at rear bumpers and hitch mount carriers and wasn’t all that crazy about any of the options available but was tired of not running with a spare around town and having to hoist it up on the roof rack for trips. I actually like the lines of the factory cover and looking under the bumper cover, figured I could make my own swing outs.

I didn’t plan on doing a writeup on this, but I think I got enough pics to explain it pretty good should anyone decide to do the same.
(insert do at your own risk disclaimer blah, blah, blah…)

Finished project:
IMG_3441

IMG_3439

Incomplete list of things needed
Started off getting some angle iron to bolt to the frame rail, I was after 3 x 4 x 1/4 but the yard had 3 1/2 x 5 x 5/16. To order what I wanted would have been a lot more expensive than using what they had lying around. Although I didn’t need 5/16 thick stock, having the additional height worked out for the better. (sometimes it’s good not to have a plan) It’s cut so that the factory tow loop mounting holes could be used, doesn’t interfere with the rear body mount and sits just proud of the rear crossmember. On my truck the factory nuts in the frame wound up breaking off so I drilled them out and used M10 weld nuts, I also added a third one. You can see the holes for the factory tie down points on the right piece in the pic.

IMG_3203

The cutout that was made to clear the body mount got reused to make a tab securing the top of the bracket to the crossmember. Nice hands lol.
IMG_3205

The notched out section on the bottom is so the bracket doesn’t interfere with the crossmember. I also added a diagonal brace tying the tab to the angle.
IMG_3213

The next few steps were preformed with the truck frame leveled and on blocks so I could ensure the parts being welded to the brackets were square to each other.

Tacked a 3 x 3 x 1/4 piece of square tube flush with the top of the angle, this worked out great because it lines up the bottom of the next piece (that the hinge mounts to) to right about where the foot step is on the bumper. This piece is about 8 3/4” inches long, and the bottom is rounded slightly, it gets really close to the bottom of the bumper cover at that point. (pic doesn't show the 3 x 3 rounded off)
IMG_3266

The piece on top of the 3 x 3 that the hinge is welded to is 4 x 6 x 1/4. with a 1/4” thick end cap. My local steel yard had 4 x 4 x 1/4 and ordering 4 x 6 would have been a lot (this is a recurring theme throughout this project). Made 4 x 6 out of 4 x 4 and saved some cash.
59166179055__12E33884-6048-4EFB-BAA0-EA38EB43AAC3
__________________
2007 SR5 4WD Nautical Blue -- Build Thread
gfxcruncher is offline   Reply With QuoteReply With Quote
Old 02-06-2020, 12:43 AM #19
gfxcruncher's Avatar
gfxcruncher gfxcruncher is offline
Member
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
gfxcruncher gfxcruncher is offline
Member
gfxcruncher's Avatar
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
DIY Rear Swingouts (Continued)

The big struggle I had was locating these pieces with the cover off so I could weld them up. I’m sure someone has a better way to do it, I wound up taking the bumper cover on and off a lot.

Important: truck is leveled on blocks/jack stands at this point.

With the bumper cover on, set up a laser level to establish the vertical line of the bracket coming through the cover and mark it on the brake light (I made marks on painters tape in the pic), repeat on the other side. Remove the bumper cover and line the 4x6 piece up with the laser, do both sides at the same time and ensure they are square to each other. (I cut a 2 x 4 to length making sure my end cuts were square) Then tacked them together.
IMG_3277

Figuring out how far the faces of the 4 x 6 should protrude from the cover, that was a pain. With the cover on I did my best to take a measurement from a point I could reference when the cover is off, like at the corner of the tail light, or at a body line in the lift gate.
In hindsight, it might have been easer to locate the strike plate for the latches (later step) and work backwards off that measurement, but at that point I only had a vague idea of how the latches we’re going to work.

Since I was doing double swing arms, I was pretty worried about the arms not lining up, so I used a long level spanning the hinges to ensure the hinges were lined up. After endless hammer tapping to get everything just right, I tacked everything up.
IMG_3279

I did make one modification to the hinges, drilled two 1/2” holes on the backs for a couple of plug welds.
IMG_3287

At this point I removed the brackets, finished the welds and added more supports. Yeah, I could have cut gussets out and they would have worked fine, I was being lazy. Are those welds ugly? Why yes, yes they are…
IMG_3291

Reinstalled the brackets, installed the sleeve in the hinge and took a measurement for the arms, there's a 1/4" gap between the arms where they meet, cut and notched the arms, mocked it all up with the arm catch and latch.
IMG_3283

I found it easier at this point to take the arm off and to the bench to weld them on, it was just easier to keep everything square.

After cutting the arms to length I made the arm catch on the ladder arm with angle, it’s spaced away from the arm by 1/8" on the top and bottom so I could put some hard polyurethane strips in there to keep it from squeaking and provide some vibration dampening. Tapped holes for 1/4-20 threads and installed the latch on the tire arm. The latch catch is a leftover cutoff from the 1 1/2 x 3 tube, I made the latch catch the same height as the one that comes with the latch.
IMG_3299

The strike plate is some leftover angle from the brackets mounted to the crossmember with weld nuts. I lucked out here, there was just enough room to slide some 1/4 plate between the strike plate and the backside of the arm. Surprisingly even though it’s metal to metal contact there’s no squeaking or movement, probably due to the 4xinnovations hinges having no play and the latch drawing the arm pretty tight, I was originally going to use some rubber spacers or something in there. If I were to do it over again, I would mount the strike plate and use that as a reference point to locate the 4x6 pieces of the bracket front to back. (sorry if this doesn’t make sense)
IMG_3398
The catch for the ladder arm latch is another 1 1/2 x 3 cutoff welded to the strike plate and the latch mounts to the 1/4 plate that hangs down.

Probably easier to see it working in a video. (this is a video)
IMG_3397
__________________
2007 SR5 4WD Nautical Blue -- Build Thread
gfxcruncher is offline   Reply With QuoteReply With Quote
Old 02-06-2020, 12:44 AM #20
gfxcruncher's Avatar
gfxcruncher gfxcruncher is offline
Member
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
gfxcruncher gfxcruncher is offline
Member
gfxcruncher's Avatar
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
DIY Rear Swingouts (Continued)

At some point after the arms and latches were on I was testing it by swinging the arms out and pushing down on them to see if they would flex, they did. The bracket was flexing away from the truck frame at the top... I added an extension to the top of the bracket, covering more of the rail and added another weld nut, still had flexing and it was flexing the side rail. (after looking closely, it looks like the side rails are made of thinner material than the crossmember) Since I wasn't using the foam insert on top of the crossmember there was just enough room to add a tab on each bracket and then tie them together with some threaded rod, that fixed the flex problem.

(Didn't get a pic. next time I have the cover off, I'll update here with one)

The tire support is some of the 1 1/2 x 3 tube the angled supports are 1 1/2 x 1 1/2 x 3/16 tube. I made the mounting plate out of 1/4” I had lying around and pressed a few old wheel studs in 1/2” holes (I could have made the holes slightly larger, it was a tight fit) wound up using a washer on the studs to space the wheel out slightly, the lug nuts were bottoming out. The mounting plate is tilted 5deg.
IMG_3411

The ladder is 1 1/2 x 1 1/2 x 3/16 square tube and has a 10 deg slant to match the rear body line. On the sides of the ladder I put some M8 weld nuts so that I could attach a bracket to hold a jerry can and hi-lift, this is my daily, so I made it removable to keep a cleaner look around town. Man, that's a clean truck...
IMG_3586

Used some angle for the bottom rung and mounted the license plate to that with side view LED bolts from Oznium. The lights aren’t the brightest, I don’t really care, they’re just there so I don’t get pulled over.
IMG_3587

Used another 1 1/2 x 3 cutoff to make a backup camera relocation mount, some rod spaced off by 1/8” and welded on provides for zip ties to keep the wires neat.
IMG_3589

IMG_3588

Once the ladder was on I could then weld the hinge catches on, I wanted to make sure the lift gate would clear the ladder.

I finished it with etch primer and Rustoleum hammered finish black matte paint which looks more like a gunmetal to me. Yeah, bad idea, that stuff doesn’t hold up very good at all, but at this point I was ready to be done with the project. Maybe I’ll wire wheel it all off and finish it properly if I ever get bored. ha.

And the real reason anyone does swing outs… overlander level 100 unlocked!
IMG_3487

That’s about it, feel free to ask questions if there’s anything that’s not clear.
__________________
2007 SR5 4WD Nautical Blue -- Build Thread
gfxcruncher is offline   Reply With QuoteReply With Quote
Old 02-06-2020, 01:47 AM #21
SHagood's Avatar
SHagood SHagood is offline
Member
 
Join Date: Aug 2017
Location: Tampa, FL
Posts: 610
SHagood is just really nice SHagood is just really nice SHagood is just really nice SHagood is just really nice
SHagood SHagood is offline
Member
SHagood's Avatar
 
Join Date: Aug 2017
Location: Tampa, FL
Posts: 610
SHagood is just really nice SHagood is just really nice SHagood is just really nice SHagood is just really nice
This is so damn creative!! I tip my hat to you sir, well done. Also, that drawer setup is DOPE.
__________________
2008 Urban Runner
MY BUILD THREAD
SHagood is offline   Reply With QuoteReply With Quote
Old 02-06-2020, 12:02 PM #22
gfxcruncher's Avatar
gfxcruncher gfxcruncher is offline
Member
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
gfxcruncher gfxcruncher is offline
Member
gfxcruncher's Avatar
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
Quote:
Originally Posted by SHagood View Post
This is so damn creative!! I tip my hat to you sir, well done. Also, that drawer setup is DOPE.
Thanks man! It's kinda like therapy for me, I'm on the computer all day.
__________________
2007 SR5 4WD Nautical Blue -- Build Thread
gfxcruncher is offline   Reply With QuoteReply With Quote
Old 02-06-2020, 05:07 PM #23
hinmo24t hinmo24t is offline
Senior Member
 
Join Date: Aug 2018
Location: MA
Posts: 1,141
hinmo24t is a jewel in the rough hinmo24t is a jewel in the rough hinmo24t is a jewel in the rough hinmo24t is a jewel in the rough
hinmo24t hinmo24t is offline
Senior Member
 
Join Date: Aug 2018
Location: MA
Posts: 1,141
hinmo24t is a jewel in the rough hinmo24t is a jewel in the rough hinmo24t is a jewel in the rough hinmo24t is a jewel in the rough
Quote:
Originally Posted by gfxcruncher View Post
Thanks man! It's kinda like therapy for me, I'm on the computer all day.
same, surf/wheeling/outdoors counter the current burning of my eyes from living the accounting life
hinmo24t is offline   Reply With QuoteReply With Quote
Old 02-09-2020, 09:38 PM #24
gfxcruncher's Avatar
gfxcruncher gfxcruncher is offline
Member
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
gfxcruncher gfxcruncher is offline
Member
gfxcruncher's Avatar
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
So this happened…

Mid way through making the swing outs I was headed out for some camping and wheeling with friends. It was the first cold snap, twilight, perfect time to meet up with a deer 10 minutes from camp… Perfect.

IMG_3315

I think the winch mount saved the truck from more damage to the rad support and inner fender skirt, walked away with 1,200 after my deductible. Found a sport hood in gray, (blends in ok until I get around to getting the hood painted) took a heat gun to the bumper cover and got it back together with some zip ties for now and put an order in for a Coastal Offroad front bumper.

Had to bang the rad support around some as well as the latch assembly, but got everything lined back up.

IMG_3348
__________________
2007 SR5 4WD Nautical Blue -- Build Thread
gfxcruncher is offline   Reply With QuoteReply With Quote
Old 02-09-2020, 10:19 PM #25
gfxcruncher's Avatar
gfxcruncher gfxcruncher is offline
Member
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
gfxcruncher gfxcruncher is offline
Member
gfxcruncher's Avatar
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
Coastal Offroad Front Bumper

Been working on this lately… Pretty happy with it, I like that you can get customizations to make it your own. Got circular light cutouts for the BD Squadrons I already have, omitted the other light cutouts and had custom tubes bent. Brandon was really helpful with all my questions and generally being a pain in his ass.

The laser cutting is really nice..
IMG_3448

So after tacking the initial pieces in place I didn’t have any gap at the headlight, seems like the consensus is to space the mounting plate at the top with washers. which also helps lining the ends up at the fenders. I tried it but wasn’t really a fan, it wound up opening a gap when looking down from the top where I could see the ground below.

IMG_3521

IMG_3529

I wound up slotting the holes for the rad support vertically and then dropping the vertical supports down on the mounting plate to get a pretty consistent gap.

IMG_3614

IMG_3551

60074580796__5E1AF20C-2288-4724-925E-490B11E28CBB
__________________
2007 SR5 4WD Nautical Blue -- Build Thread
gfxcruncher is offline   Reply With QuoteReply With Quote
Old 02-09-2020, 10:27 PM #26
gfxcruncher's Avatar
gfxcruncher gfxcruncher is offline
Member
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
gfxcruncher gfxcruncher is offline
Member
gfxcruncher's Avatar
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
Coastal Offroad Front Bumper (continued)

Skipping the picks of the bumper tacked up… Got the finish welding and grinding on the bumper done last weekend. This weekend, got the tubes on. What a monumental time consuming pain getting them cut to length and notched (my notches totally suck) BUT, I love the way it’s turning out. Pretty soon it’ll be paint prep.

IMG_3612

IMG_3609

IMG_3611
__________________
2007 SR5 4WD Nautical Blue -- Build Thread
gfxcruncher is offline   Reply With QuoteReply With Quote
Old 02-09-2020, 11:31 PM #27
xtremewlr's Avatar
xtremewlr xtremewlr is offline
Member
 
Join Date: Nov 2019
Location: Tucson, AZ
Posts: 815
Real Name: Todd
xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold
xtremewlr xtremewlr is offline
Member
xtremewlr's Avatar
 
Join Date: Nov 2019
Location: Tucson, AZ
Posts: 815
Real Name: Todd
xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold
Quote:
Originally Posted by gfxcruncher View Post
Skipping the picks of the bumper tacked up… Got the finish welding and grinding on the bumper done last weekend. This weekend, got the tubes on. What a monumental time consuming pain getting them cut to length and notched (my notches totally suck) BUT, I love the way it’s turning out. Pretty soon it’ll be paint prep.

IMG_3612

IMG_3609

IMG_3611
Bumper is coming out very nice, good work! I remember doing mine for the Tacoma. Lots of work welding and then grinding to get it looking good but so wort it in the end. I've also got the rear bumper on the Tacoma and plan on doing front and rear on the 4runner eventually.
xtremewlr is offline   Reply With QuoteReply With Quote
Old 02-09-2020, 11:39 PM #28
gfxcruncher's Avatar
gfxcruncher gfxcruncher is offline
Member
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
gfxcruncher gfxcruncher is offline
Member
gfxcruncher's Avatar
 
Join Date: Sep 2017
Location: Northern Virginia
Posts: 259
gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about gfxcruncher has a spectacular aura about
Quote:
Originally Posted by xtremewlr View Post
Bumper is coming out very nice, good work! I remember doing mine for the Tacoma. Lots of work welding and then grinding to get it looking good but so wort it in the end. I've also got the rear bumper on the Tacoma and plan on doing front and rear on the 4runner eventually.
Thanks man!
Yeah, it's a lot of work, but I've been enjoying it (so far).
Looking forward to seeing yours done up!
__________________
2007 SR5 4WD Nautical Blue -- Build Thread
gfxcruncher is offline   Reply With QuoteReply With Quote
Old 02-09-2020, 11:40 PM #29
xtremewlr's Avatar
xtremewlr xtremewlr is offline
Member
 
Join Date: Nov 2019
Location: Tucson, AZ
Posts: 815
Real Name: Todd
xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold
xtremewlr xtremewlr is offline
Member
xtremewlr's Avatar
 
Join Date: Nov 2019
Location: Tucson, AZ
Posts: 815
Real Name: Todd
xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold xtremewlr is a splendid one to behold
Quote:
Originally Posted by gfxcruncher View Post
Thanks man!
Yeah, it's a lot of work, but I've been enjoying it (so far).
Looking forward to seeing yours done up!
Gunna be a minute still but it will happen!
xtremewlr is offline   Reply With QuoteReply With Quote
Old 02-16-2020, 10:59 AM #30
apohl17's Avatar
apohl17 apohl17 is offline
Member
 
Join Date: May 2015
Location: Wisco
Posts: 934
Real Name: The Native Explorer
apohl17 is a glorious beacon of light apohl17 is a glorious beacon of light apohl17 is a glorious beacon of light apohl17 is a glorious beacon of light apohl17 is a glorious beacon of light apohl17 is a glorious beacon of light
apohl17 apohl17 is offline
Member
apohl17's Avatar
 
Join Date: May 2015
Location: Wisco
Posts: 934
Real Name: The Native Explorer
apohl17 is a glorious beacon of light apohl17 is a glorious beacon of light apohl17 is a glorious beacon of light apohl17 is a glorious beacon of light apohl17 is a glorious beacon of light apohl17 is a glorious beacon of light
Awesome build thread, thanks for the quality rear bumper write up man. Looks killer, and props to you for such a nice latch design... Dang
__________________
"Bumble" '17 Lim w/ 35k, IVD Stage 7, CBI/Prinsu metal, Morimoto lighting, ARB Linx : Build thread in progress...
The AventuRunner Build '07 V8 Sport w/ DO armor, Fox squish, Falken rubber, IVD UCAs, BD lights, Sherpa rack -- gonna miss the V8
The "Iceberg" Build... Natty White 3rd Gen ----gone, but not forgotten...
IG @apohl17
From ye fellow @Konkordmusk... "The 4Runner does not drive. It simply rotates the Earth to your desired position."
apohl17 is offline   Reply With QuoteReply With Quote
Reply

Tags
2007 4runner , 4th gen 4runner , build/adventures , gfxcrunchers , nautical blue

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
turbodb's Build and Adventures turbodb 3rd gen T4Rs 54 01-17-2021 07:27 PM
The Overland Adventures - 4th Gen Build! fo' runnin' 4th Gen T4Rs 179 10-02-2018 09:46 AM
Tbrock's Build & Adventures TBrock 5th gen T4Rs 63 10-30-2017 01:18 PM
ComradeVlad's Build & Adventures ComradeVlad 3rd gen T4Rs 17 12-09-2016 07:39 PM
Stillbreathn - Build and Adventures Stillbreathn 5th gen T4Rs 24 11-27-2016 09:49 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 07:50 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020