looking for source for gen4 door moulding

mtnjak · Oct 3, 2026

View attachment 521931
Dealer called these plastic panels "outside door moulding" (see grey "armor"

in photo...
what are these called, and where is the best place to buy replacements? mine pop away from the body/doors
in locations where the blue couplers broke off the keeper in the grey part. Thanks!

Parks Junkie · Oct 3, 2026

I call them gingerbread or plastic body cladding. I hated them on my QX4 which the 4Runner replaced, only to have the same junk on it.

Anyway, done ranting. Hopefully.

On the aforementioned QX4, I had one on a door that was about to fall off. It gave me warning, it wasn't overnight. Seemed there had been a previous repair, probably 10 years or more, not overnight, that was not up to factory standards and was failing. Clips that didn't clip, some sort of adhesive that had long stopped adhering. It was close to falling off I used a combo of 3M VHB tape and 3M super weatherstripping adhesive. Admittedly sounding like a 3M shill, I'm not sure which did the job, or if it was the combo. but in the 3 years or so I had it after the repair it was solid.

Toyota and Nissan plastics may be different, so what worked for me may not work for you, but that's what I'd use.

mtnjak · Oct 6, 2026

Thanks Parks Junkie!

SocalSam · Oct 7, 2026

Press in plastic plunger clips secure cladding to metal. Take a look at these:

https://www.ebay.com/itm/376727870229

mtnjak · Oct 20, 2026

Thanks guys! ok, received a quote for replacement "moulding" pieces, anyone have a better idea than black or gray primer directly on the body? price for all those parts -

1 75732-35120 : MOULDING, FR DOOR, SPORD 543.84 543.84 543.84
1 75731-35120 : MOULDING, FR DOOR, SPORD 693.36 693.36 693.36
1 75741-35120 : MOULDING, RR DOOR, SPORD 596.77 596.77 596.77
1 7574235120 : MOULDING EP
1 75653-35090 : MOULDING, QUARTER, SPORD 236.07 236.07 236.07
1 75654-35090 : MOULDING, QUARTER, SPORD 236.07 236.07 236.07
ALL PARTS ABOVE ARE DISCONTINUED AND NO LONGER AVAILABLE TO ORDER

1 53847-35110 : EXTENSION, FR WHEEL SPORD 474.72 474.72 474.72
ETA 3-5 DAYS
1 53848-35110 : EXTENSION, FR WHEEL SPORD 470.22 470.22 470.22
ETA 3-5 DAYS

mtnjak · Nov 4, 2026

SocalSam said:
Press in plastic plunger clips secure cladding to metal. Take a look at these:

https://www.ebay.com/itm/376727870229

Thanks SoCal Sam! that will definitely help with my project...i bought some from dealer for $2/ea....

mtnjak · Sunday at 2:19 PM

Thanks All! i can find the little blue and red/orange clips, bigger problem right now is that some of the
attachment point on the gray moulding pieces to engage the clips are broken, so was looking for any reasonable sources for replacing those. It might be that enough of them are functional, that if i use enough of the adhesive/tape in the right locations, i can make it work.

looking for source for gen4 door moulding

mtnjak

New member

Parks Junkie

Member

mtnjak

New member

SocalSam

Member

mtnjak

New member

mtnjak

New member

mtnjak

New member

Similar threads

Members online

Forum statistics

Share this page

Trending content