12voltguy still in business?

[Devbot]

I know it's not the cable you mentioned previously, but the small wiring Toyota used the same size as 20-AWG, in case you're forced to make a new harness in the end. You probably knew this but I wanted to mention it in case you didn't, it's good information to have for times like these

 

[shadow247]

Well, you would think, but that assumes he actually responds...

The good news is that I found a guy on ebay selling 50' lengths of Genesis 3117 18/8c plenum cable, so that'll do for now. Guess I get to build a harness after all.

Thanks for everyone's help so far.

I used Car Audio 8 Way Speaker wire to run my harness. I have the OEM Locker/ECU, but received a cut harness with everything spliced together and no middle harness.

I just matched up all wires, made myself a color chart, and went for it. I think you should probably be able to get some of that from a local car audio shop.

This is pretty much what I used - 8-Conductor 13AWG Unshielded Loudspeaker Multiconductor Speaker Cable - Per Foot

 

[thezentree]

I know it's not the cable you mentioned previously, but the small wiring Toyota used the same size as 20-AWG, in case you're forced to make a new harness in the end. You probably knew this but I wanted to mention it in case you didn't, it's good information to have for times like these

I did not know that, but I do now. Do you know what kind of pins I need?

I used Car Audio 8 Way Speaker wire to run my harness. I have the OEM Locker/ECU, but received a cut harness with everything spliced together and no middle harness.

I just matched up all wires, made myself a color chart, and went for it. I think you should probably be able to get some of that from a local car audio shop.

This is pretty much what I used - 8-Conductor 13AWG Unshielded Loudspeaker Multiconductor Speaker Cable - Per Foot

I wish you had posted that on Monday haha. 50' of 18/8 plenum cable showed up on my porch this afternoon.

 

[thezentree]

Just in case anyone is skimming the thread and missed my question to Devbot:

What kind of pin/socket and crimping tools do I need? That's 18awg wire and the pin/socket/whatever you wanna call it is 3mm wide.

 

[Devbot]

I did not know that, but I do now. Do you know what kind of pins I need?



I wish you had posted that on Monday haha. 50' of 18/8 plenum cable showed up on my porch this afternoon.

I do not, no, I have an air locker instead of e-locker. They most certainly have a part number and I would be pretty shocked if they've been discontinued, but I don't have that number ready to go or anything. I wasn't even aware you could buy standalone pins from Toyota until like two weeks ago, actually :lol:

 

[RomanSchnobrich]

I've been after an elocked axle for years with no luck unfortunately. But when my lucky day does arrive, this is an option I've been considering. Ultimate Toyota E Locker Wiring Harness Kit By Low Range Off Road

 

[96RedRunner]

https://www.toyota-4runner.org/3rd-...nnector-terminals.html?highlight=4Runner4Leon

I bought the crimpers in this thread. There is a pin tool you can buy for removal of pins I used T shaped sewing pins and micro screwdrivers.

 

[96RedRunner]

when my lucky day does arrive, this is an option I've been considering. Ultimate Toyota E Locker Wiring Harness Kit By Low Range Off Road

That harness $200 more than what you can do it for using the attachment I posted.

 

[thezentree]

https://www.toyota-4runner.org/3rd-...nnector-terminals.html?highlight=4Runner4Leon

I bought the crimpers in this thread. There is a pin tool you can buy for removal of pins I used T shaped sewing pins and micro screwdrivers.

<3

Thank you.

 

[96RedRunner]

<3

Thank you.

It all good I try to help when I can.
That thread good source for pins & sockets.
Depends on what connectors Yota Masters uses some interchange some don't.
That the next wrench in the spokes for you sourcing the correct pins/sockets.

When I did Lockers on my 01 like you start from scratch, throw in I used the LandCruiser
dual locker rotary switch none of the harnesses on the market were worth the money.

 

[thezentree]

Easy mode works again. Thanks everyone for your help.

 

[brillo_76]

Good job...

Sent from my SM-A505U using Tapatalk

 

[Johnny_buttcakes]

12 volt elocker switch schematic

Anyone have a working 12 voltguy harness and could grab a picture of the wire order on back of switch?

Took mine apart haven't been ablev to hook it up right, can't get ahold of the guy.

Need to know the order of the wires on back of locker switch.

Thanks.

 

[thezentree]

Anyone have a working 12 voltguy harness and could grab a picture of the wire order on back of switch?

Took mine apart haven't been ablev to hook it up right, can't get ahold of the guy.

Need to know the order of the wires on back of locker switch.

Thanks.

I can get a couple pics for you but probably can't get to it until next week. Does your switch have all the colored dots on the side? If so, those correspond to the wire color that connects there.