#3 misfire problems

[Doc2012]

used noid light 2 check circuit and 9v battery on injector.
sorry 4 typos my phone is bad for doin this.
i replaced plug and runs fine 4now and no CEL.
sparkplug boot is clean and new
cant get picture of gunk in the sparkplug tunnel.
going to do compression test when sun is up and will report back

Again, just to reiterate, you CAN NOT JUST USE A LIGHT AND A BATTRY TO TEST THE INJECTORS ACCURATELY.

They have to be tested with an Ohm meter.


<iframe width="420" height="315" src="https://www.youtube.com/embed/drGaZNky2Q4" frameborder="0" allowfullscreen></iframe>

 

[96-Runner]

checked injector usin ohm test and was injector was good. compression test for 1 3 and 5 are
#1 160
#3 130
#5 165

im pretty sure that there isnt suppose b that range of variance between them


ill put the others up in a few

 

[96-Runner]

#2 175
#4 160
#6 165