3rd Gen FAQ, Tutorials, & Documentation Reference

[BrianSD_42]

added ...



Write-up: Catalytic Converter


http://www.toyota-4runner.org/3rd-gen-t4rs/137889-write-up-catalytic-converter.html


:surfer:

 

[tyr0981]

sweet

 

[BrianSD_42]

Adding ....

WRITE UP: climate control and dash bulbs 2000 limited


Link ----> http://www.toyota-4runner.org/3rd-g...-climate-control-dash-bulbs-2000-limited.html



lane:

 

[BrianSD_42]

Adding ...


**Rickashay's OME vs. TRD Tundra/LC Review**


Link ----> http://www.toyota-4runner.org/3rd-gen-t4rs/101758-**rickashays-ome-vs-trd-tundra-lc-review**.html

lane:

 

[BrianSD_42]

Adding .....


Replacing the OEM Engine Mounts, 36 + 1 steps


Link ---> http://www.toyota-4runner.org/3rd-gen-t4rs/148092-engine-mount-transmission-mount.html


lane:

 

[BrianSD_42]

Adding ....

Lower Ball Joint Removal and Installation


Link ---> http://www.toyota-4runner.org/3rd-gen-t4rs/103217-lower-ball-joint-removal-installation.html

lane:

 

[BrianSD_42]

Adding ..... Projector Retrofit Picture Thread and FAQ

Link ---> http://www.toyota-4runner.org/3rd-gen-t4rs/157607-projector-retrofit-picture-thread-faq.html

:spy:

 

[BrianSD_42]

Added: How to install a Clock Spring a.k.a. Spiral Cable


Link ----->

http://www.toyota-4runner.org/3rd-gen-t4rs/89398-how-install-clock-spring-k-spiral-cable.html


:washing:

 

[BrianSD_42]

Adding ... How to convert your corner light to a turn signal!

Turn Signal Mod: Aftermarket Bumper ~WRITE UP~

http://www.toyota-4runner.org/3rd-gen-t4rs/155121-turn-signal-mod-aftermarket-bumper-~write-up~.html

 

[vicar]

oil change link

Looks like the link to the 3.4L oil change info is dead...has that been reposted anywhere?

Thanks!

 

[robb1887]

Most complete parts diagram I've found here:
TOYOTA 4RUNNER VZN180L-GKPZKA | TOOL-ENGINE-FUEL | | Japan Parts EU

 

[BrianSD_42]

Brian's Duplicolor 3rd Gen Wheel Painting - A How To Story



---> http://www.toyota-4runner.org/3rd-g...licolor-3rd-gen-wheel-painting-how-story.html



:roadkill:

 

[BrianSD_42]

I thought this was a pretty decent list of guides as well .... although it is on another site definitely worth checking out if you don't find the answer here.

3rd Gen 4Runner FAQ
----> 3rd Gen 4Runner FAQs | IH8MUD Forum

:angel:

 

[BrianSD_42]

How To Remove and Re-install Toyota Heads


---> http://www.toyota-4runner.org/3rd-gen-t4rs/166357-trying-get-heads-off-new-gaskets.html


(Thanks to THE DURK)


:thumb:

 

[MartinC]

Absolutely wonderful post! Thank you so much! You helped me with all the things that needed fixing. Much appreciated!

 

[t4r92]

FYI, none of the FSM links work at the top of the page any longer. Tried to download the '99 for my truck.

 

[TheDurk]

FYI, none of the FSM links work at the top of the page any longer. Tried to download the '99 for my truck.

FYI, the '99 has never been available on line. The NTTORA links have been dead for two or three years following a take-down notice they got from Toyota, but those were always the 2002 books. You can access the 2002 FSM here:

1996 to 2002 Toyota 4Runner OEM Repair and Wiring Manuals

I have a paper '99 FSM if you have a specific question.

 

[t4r92]

FYI, the '99 has never been available on line. The NTTORA links have been dead for two or three years following a take-down notice they got from Toyota, but those were always the 2002 books. You can access the 2002 FSM here:

1996 to 2002 Toyota 4Runner OEM Repair and Wiring Manuals

I have a paper '99 FSM if you have a specific question.

Thanks for the heads up [MENTION=10169]TheDurk[/MENTION] . I was curious if the axles on the 99 required anything specific to the 122.2mm spacing on the retainers of the axles like I am finding on page SA-84 relating to the installation of the retainer on the innermost portion of the rear axles of our trucks.

Thanks,

Blane

 

[XxTiBEARiusxX]

Thanks for the post! Years later and it's still useful!:rockon:

 

[techno]

Don't flush the tranny. Just drain and refill 2 or 3 times, with a few miles between each.