3rd Gen T4R Picture Gallery

Status
Not open for further replies.
Jon sounds serious to me, but there is a loss of interpretation without seeing a face to go with the comments.

I'm being serious though. Another reason i can't wait to move to Montana. Pretty sites and a slower way of life.
 
Cleaned her up nice and perty! Took a 500 mile trip to Chicago and back this weekend, and there were so many damn bugs on the front and road grime everywhere else. So I took advantage of the mid 60s weather and washed it. Cleans up pretty well.

IMG_9840.jpg~original
 
lol, yeah our mountains suck.... oh wait, no they don't!

Believe it or not, I know how it feels, I actually live in the Prairies and can only "see" the tops of the mountains on the horizon. It takes me a solid 55 min. drive to actually reach them! haha

Lucky! Takes me about 13 hours of driving to get to where you live, let alone the mountains!
 
Steeze is that with or without swaybars?

Front is off. Rear is on. I've found thats the best compromise between flex and handling. Also, with the rear on, it will limit the travel so my springs won't fall out. I'm working on a different spring mount and rear sway bar setup to get more flex and not have to worry about losing a spring.
 
Nice I hear that if you bolt your bump stops to the frame they won't fall out.. Not sure where I read that but I think it was on here..
 
Pff you call that flex? Weak! :jk: Is that with the 5150's?

On another note, I really like the unpainted sport hood on the Sunfire Red. Might have to pick one up if I'm ever by a Certifit. Hmmm
 
Nice I hear that if you bolt your bump stops to the frame they won't fall out.. Not sure where I read that but I think it was on here..

Yep thats the plan. Bolt the upper cones to the frame and then add some bolt on tabs to the axle so the spring can't move on the lower seat. Once that gets done, different sway bar setup and new upper links with heims. BE PREPARED FOR RIDICULOUS FLEX

Pff you call that flex? Weak! :jk: Is that with the 5150's?

On another note, I really like the unpainted sport hood on the Sunfire Red. Might have to pick one up if I'm ever by a Certifit. Hmmm

Yep they are! Thanks again for sending them to me! I haven't really posted up about the change yet because i'm still working out some kinks. With those eye to stud adapters, they were waaaaay to long. I could bottom out the shock and it actually flexed way less than it does now even though the shocks were longer. They are pretty good right now. The left shock has about another inch of compression left in these pictures.

I haven't painted the hood yet because i do kinda like it. But i think its mostly just because i'm lazy :D
 
Yep thats the plan. Bolt the upper cones to the frame and then add some bolt on tabs to the axle so the spring can't move on the lower seat. Once that gets done, different sway bar setup and new upper links with heims. BE PREPARED FOR RIDICULOUS FLEX

Hey Steez, are you planning on running adjustable uppers? or keeping them stock length?

I found these over on Mud, they look super BEEF: Control Arms

Unless of course, Toytec will be making some uppers in the near future?!?
 
Yes, but it's worth every hour of that drive! So when are you planning on coming wheeling out my way this summer? huh, huh??

My little brother used to live in CGY, but moved back to MB last spring, so I don't actually have an AB trip planned this year. I was thinking of trying to get to Colorado maybe, we went to Montana last year and did the yellowstone park thing, it was a great trip! Love the mountains!
 
My little brother used to live in CGY, but moved back to MB last spring, so I don't actually have an AB trip planned this year. I was thinking of trying to get to Colorado maybe, we went to Montana last year and did the yellowstone park thing, it was a great trip! Love the mountains!

I think you should do a BC trip instead. I will join you. haha
 
Hey Steez, are you planning on running adjustable uppers? or keeping them stock length?

I found these over on Mud, they look super BEEF: Control Arms

Unless of course, Toytec will be making some uppers in the near future?!?

They will have a bushing on one end and heims on the other just like the lowers so they will be adjustable. We already have a pair made. Just waiting on bushings.

Toytec will be selling them soon!
 
Status
Not open for further replies.

Members online

Forum statistics

Threads
278,316
Messages
3,554,111
Members
248,016
Latest member
Advally Service

Trending content

Back
Top