3rd Gen T4R Picture Gallery

[KellyJ]

They come primered so you can color match.

IMO, you should color match it like you did your grille and spoiler.

I cant f***ing figure out PayPal for the life of me. I stupidly created a PayPal account jointly with my parents using my email account and their bank account a few years back while I still lived with them so I could pay for things on eBay, which makes it impossible for me to manage. But I do want that mount. How's the fit? Would I really need that little piece of plastic to protect the rear hatch? I guess I could paint that silver too.

Hepar -- I noticed you mentioned installing some mud flaps that looked almost OEM in the front, and that you followed some link, but I cannot find any pictures of the setup of what they look like on your truck or the link you used. Could you re-post that?

 

[fincsher]

I'm gonna have an adventure together with my 3rd gen T4R. I'll take some pics.. and gonna show it here..

 

[Jon]

Been a while since I did any pics, so here's some new ones.

Rock climbing in FL





Just a little flexin

 

[blcktpgsr]

Been a while since I did any pics, so here's some new ones.

Just a little flexin
View attachment 38383

Nice Jon....did you remove the rear swaybar end links? that tire is stuffed!

 

[Jon]

Nice Jon....did you remove the rear swaybar end links? that tire is stuffed!

I removed both sway bars. I'd really like to make a slip joint type quick disco for the front. I remember someone fabricating some bu cant find the darn post anywhere. The extra travel isn't worth the horrible on road handling, although the off road ride is great with it removed. The rear isn't really that big of a deal.

The rear stuff is kinda ridiculous.

 

[blcktpgsr]

I removed both sway bars. I'd really like to make a slip joint type quick disco for the front. I remember someone fabricating some bu cant find the darn post anywhere. The extra travel isn't worth the horrible on road handling, although the off road ride is great with it removed. The rear isn't really that big of a deal.

The rear stuff is kinda ridiculous.

I thought you did! I was either thinking you have the disco's or you completely removed them.

I'm gonna try it one time to remove the front links and drive on the road... I already did without the rears...ridiculous stuff-ing indeed!

I was already looking at McMaster-Carr products and trying to see what I can come up with.

 

[fincsher]

mmm mmm good! i miss my tint!

It needs full body car wash..

 

[ChildrenOfBodom]

I cant f***ing figure out PayPal for the life of me. I stupidly created a PayPal account jointly with my parents using my email account and their bank account a few years back while I still lived with them so I could pay for things on eBay, which makes it impossible for me to manage. But I do want that mount. How's the fit? Would I really need that little piece of plastic to protect the rear hatch? I guess I could paint that silver too.

Hepar -- I noticed you mentioned installing some mud flaps that looked almost OEM in the front, and that you followed some link, but I cannot find any pictures of the setup of what they look like on your truck or the link you used. Could you re-post that?

i didn't need the extra piece though it is good insurance...

I never used mine, still sitting in my glovebox.

Great fit, he used my truck as the template

 

[vol4runner]

Hey opie! Where in WV are you? I'm in the Charleston area.

 

[Hepar]

Hepar -- I noticed you mentioned installing some mud flaps that looked almost OEM in the front, and that you followed some link, but I cannot find any pictures of the setup of what they look like on your truck or the link you used. Could you re-post that?

I don't have any pics, but I can take some if you want. This is the link I followed:

Project SportRunner - Front Splash Gaurds

 

[toytruck]

Here's what I got so far, man, I think my rear is sagging. There's nothing in the rear of the truck besides that bike carrier...hmmm

It also looks like my cb antenna is angled a little too far back. I wonder if Drifterr's mount would fix this? Any thoughts?

 

[ChildrenOfBodom]

It doesn't look too bad but you will certainly have a straighter angle with driffters mount.

 

[4Runner8]

Here's what I got so far, man, I think my rear is sagging. There's nothing in the rear of the truck besides that bike carrier...hmmm

It also looks like my cb antenna is angled a little too far back. I wonder if Drifterr's mount would fix this? Any thoughts?

that looks awesome! those rims match your grey trim almost perfectly. i vote a 3 inch lift with all new springs and shocks and you'll be looking right

 

[97UnLimited]

I thought you did! I was either thinking you have the disco's or you completely removed them.

I'm gonna try it one time to remove the front links and drive on the road... I already did without the rears...ridiculous stuff-ing indeed!

I was already looking at McMaster-Carr products and trying to see what I can come up with.

Hey Bro,

If your looking into "ROD END BEARINGS" for sway bar end links?
Just to let you know I built some for my Runner with those, and they get loud after a couple months, just to give you the heads up!

First Set I made without Grease Nipples>

And I thought maybe the Greasable ones would last longer!!! Not really

 

[blcktpgsr]

Hey Bro,

If your looking into "ROD END BEARINGS" for sway bar end links?
Just to let you know I built some for my Runner with those, and they get loud after a couple months, just to give you the heads up!

First Set I made without Grease Nipples>

And I thought maybe the Greasable ones would last longer!!! Not really

Those look like high quality made ones Bro..but what about using some booted Rod ends with zerks to re-grease? i suppose they should last without running out of grease.

So what are you using at the meantime?

 

[Hepar]

Some pics of our Seattle lift party today.

 

[Hepar]

 

[bak3rme]

Some pics of our Seattle lift party today.

sweet nice pics. what kinda lens did you use this time? some kinda wide angle lens? pics turned out nice. whos rig did u lift?

 

[four flusher]

wish i had friends!

Great pics, Hepar

 

[Hepar]

sweet nice pics. what kinda lens did you use this time? some kinda wide angle lens? pics turned out nice. whos rig did u lift?

Thanks. These were all shot on a 14-24mm lens. We lifted Telluride27's rig. It's the black sport.