4runner TRD Pro
- Thread starter Trob20
- Start date
4RunnerPro
New member
Toytec 1/4 top plate
Today I had the toytec 14 top plate installed. I think it looks great. While it's not totally level it has just a tiny bit of rake which think is perfect since I do tow dirt bikes and such. Really it's not too noticeable but I can see it. I think I used a different plate than Vlad used. His might be a hair taller.
Like I said, hard to see but there is a little lift there, lol.
Today I had the toytec 14 top plate installed. I think it looks great. While it's not totally level it has just a tiny bit of rake which think is perfect since I do tow dirt bikes and such. Really it's not too noticeable but I can see it. I think I used a different plate than Vlad used. His might be a hair taller.
Like I said, hard to see but there is a little lift there, lol.
Doc_Fry
New member
Talked to SET today about the fender flair issue. I am ok with it and got some touchup paint out of it. But they are looking to address it. The fenders are cut at the port. So far they are going to clean up the cuts and work on getting them touched up.
Nothing big but if it bothers you hit up your dealer for a bottle of touch up to help mitigate any future peeling in the area of paint.
Nothing big but if it bothers you hit up your dealer for a bottle of touch up to help mitigate any future peeling in the area of paint.
Took mine in yesterday and they did a complete 4 wheel alignment and got it all back to perfect.
Also another thing I noticed might not be the same on everybody's. Drivers side rear wheel well liner. Mine was very loose and rattled. All you had to do was tap the liner behind the rear tire and it would rattle like crazy, rear passengers could hear it easily. Anyway they fixed that as well. Other than that my 5000 went well. They didnt mention the inner fender trimming, but I had already self trimmed it.
T-SB-0009-15 TRD Pro Bumper/Fender Interference
Received the 2015 TRD Pro TSB recently from Steven Landry on the ATL4R FB page.
T-SB-0009-15 TRD Pro Bumper/Fender Interference
It documents what is done for the fender mod/cut done at port. The file is 8Mb, thus I can't attach it and don't have space/site to host this. Can someone assist in hosting and/or posting this file? I looked at the FAQ and it mentions limits on the attachment size.
EDIT:
I will add or update the TSB thread or embed the link also.
Received the 2015 TRD Pro TSB recently from Steven Landry on the ATL4R FB page.
T-SB-0009-15 TRD Pro Bumper/Fender Interference
It documents what is done for the fender mod/cut done at port. The file is 8Mb, thus I can't attach it and don't have space/site to host this. Can someone assist in hosting and/or posting this file? I looked at the FAQ and it mentions limits on the attachment size.
EDIT:
I will add or update the TSB thread or embed the link also.
Last edited:
Whitetrdpro
New member
I'm getting the wife's trd pro tinted on Friday. Any ideas or pics on what you guys went with. Percentage?
ComradeVlad
New member
I went with 15%. It's really enough for both day and night. I'm debating on doing 90% Ceramic on the windshield.
ComradeVlad
New member
Big Mountain
New member
Let me know if you find something, the closest thing I've found is this set up. Toyota 4-Runner LED Lights | Toyota LED Lights | 4-Runner LED Light Bar | Rigid Industries
Whitetrdpro
New member
Thanks. 15% sounds like a good number.
PharmNip
New member
First post...have a few questions
This is mine...got it back in November. It's about to break 5000 miles. I have 3 questions:
1) Are there any rocker switches that fit the stock holes in the dash where I can add aux. lighting?
2) Best rock sliders/step combo?
3) Mine keeps getting this odd jerky sensation when maintaining speed around 45 mph (rpm 1200) and the dealership has no clue...any ideas? Tires are balanced. Almost feels like a warped rotor sensation but I'm maintaining speed and not using the brakes.
Thanks in advance!
This is mine...got it back in November. It's about to break 5000 miles. I have 3 questions:
1) Are there any rocker switches that fit the stock holes in the dash where I can add aux. lighting?
2) Best rock sliders/step combo?
3) Mine keeps getting this odd jerky sensation when maintaining speed around 45 mph (rpm 1200) and the dealership has no clue...any ideas? Tires are balanced. Almost feels like a warped rotor sensation but I'm maintaining speed and not using the brakes.
Thanks in advance!
Attachments
ComradeVlad
New member
1. Yes, there are. Search on here or online. Try searching Toyota Rocker Switches.
2. There's a few out there. I was looking at getting Metaltech OPOR for myself.
3. Doesn't sound normal and I don't have an answer for you.
man thats a great shot! I hit a puddle not nearly that fast and then looked under the hood after I got home..... eek! I really wish there was a way to have some sort of splash guard to keep water from spraying all over the engine when hitting puddles that hard haha ! great photos!
marshal
New member
It's called, grab your testicles and act like a man
yea nothing more manly than having an engine compartment full of mud.... :blabla:
I can say whatever I want dude geezus I dont mind it getting dirty But I do also like keeping it clean..... I guess you're another one of those 5th gen dicks I keep hearing about.
