rallybabyracing
New member
Found out my trd pro also arrived in NY. My dealer said to expect delivery the 1st or 2nd week of May.
4runner TRD Pro
- Thread starter Trob20
- Start date
Found out my trd pro also arrived in NY. My dealer said to expect delivery the 1st or 2nd week of May.
Shaolin
New member
rallybabyracing
New member
Inferno
Kidding!
3/4" Spacer Kit
Just wanted to share a couple of mods that I have done over the past couple of weeks. to anyone out there who is considering installing the 3/4" front coilover spacer kit, I highly recommend it. My rig finally sits level now and there is absolutely no difference in ride quality. I also plastidipped the back logo and side TRD PRO badges in the anthracite grey. Really digging the look. Next up is to get the front windows tinted and maybe dip the roof rails as well.
Just wanted to share a couple of mods that I have done over the past couple of weeks. to anyone out there who is considering installing the 3/4" front coilover spacer kit, I highly recommend it. My rig finally sits level now and there is absolutely no difference in ride quality. I also plastidipped the back logo and side TRD PRO badges in the anthracite grey. Really digging the look. Next up is to get the front windows tinted and maybe dip the roof rails as well.
serial0l0
New member
LOL...This might sound crazy but that makes two of us! I had actually just left the lot after ordering a TEP in attitude black and I saw an Inferno turn left in front of me. I decided right then that I wanted the TRDP.
I don't even have any mods planned other than a Gobi Stealth and some sliders. I'm going to just try to plan trips that involve off road activities and let necessity decide the mods for me...That's the plan anyway!
kzanard
New member
serial0l0
New member
Just wanted to share a couple of mods that I have done over the past couple of weeks. to anyone out there who is considering installing the 3/4" front coilover spacer kit, I highly recommend it. My rig finally sits level now and there is absolutely no difference in ride quality. I also plastidipped the back logo and side TRD PRO badges in the anthracite grey. Really digging the look. Next up is to get the front windows tinted and maybe dip the roof rails as well.
[IMG...[/IMG]
That looks good man. Got a link for the spacer? And I second that question above me; DIY?
edit:// One more stock pic...I know you guys have seen em enough but wth:
Attachments
Last edited:
Here is the link to the spacer kit: Front Top Plate Spacer Kit
I had the installation done at the dealership actually- they assured me that any manufacturer's warranty would not be voided by installing the spacers. I haven't had any issue with the clunk sound as mentioned above so I wasn't too concerned about installing the spacers and having the dealer try to pin the issue on an aftermarket part... I do see your point though
4RunnerPro
New member
Spacer
This is the Toytec kit that I used. It is a quarter inch less lift than the other kit above but you can see the difference from stock. They can be DIY if you have skills but I had mine done at my friends shop. With a full tank of gas it is really about level. I don't want to be nose high at all and I do tow our dirt bikes and such so I didn't mind being a hair ass high so there is no squating when towing the bikes or when loaded in the rear. Just wanted to add to the confusion a little. The ride is unchanged from stock. You do need to buy two of the spacers but you don't need the new bolts.
Front Top Plate Spacer (One - 1/4")
Not the best pictures but you can tell it's taller than stock.
This is the Toytec kit that I used. It is a quarter inch less lift than the other kit above but you can see the difference from stock. They can be DIY if you have skills but I had mine done at my friends shop. With a full tank of gas it is really about level. I don't want to be nose high at all and I do tow our dirt bikes and such so I didn't mind being a hair ass high so there is no squating when towing the bikes or when loaded in the rear. Just wanted to add to the confusion a little. The ride is unchanged from stock. You do need to buy two of the spacers but you don't need the new bolts.
Front Top Plate Spacer (One - 1/4")
Not the best pictures but you can tell it's taller than stock.
serial0l0
New member
I notice both of y'alls links are pointing to the 96-02 runner. I'm guessing they are the same spacer? I see that they have both the pair of 3/4" and the single 1/4" under the 2010+ section too tho. Didn't think to look at part numbers....may be the same...i'll sheck. Thanks!
So I had an issue with my passenger front shock, which required it to be replaced. Dealership called me Monday and told me they should receive it by June 3. Lucky for me the shock is still operable just a crushed shock cover. Kinda funny they have to replace the whole shock and not just the cover.
spencenasty
New member
Just got mine on Tuesday.
Obligatory pictures.
Obligatory pictures.
4RunnerPro
New member
Same same
Serial010, the part numbers are the same. Sorry for the confusion. I didn't check my work. This should be the right link.
Front Top Plate Spacer (One - 1/4")
Serial010, the part numbers are the same. Sorry for the confusion. I didn't check my work. This should be the right link.
Front Top Plate Spacer (One - 1/4")
Hey fellas I just joined the club. Got a black on black model. I live in Houston and had to go all the way to tucson AZ to get it. The local dealers made promises but couldn't deliver so I bought this one off the showroom floor. I'm not sure if I overpaid but I got it without step bars and cargo slider thing for 46,680 out the door. What did everyone else pay? My wife wants a lift kit and 35's but I'm pretty happy with how it sits right now. I might throw a 1" spacer on the wheels but that's about it. Very happy with it.
