mrichard89
New member
Good point. I was just quote at $1400 to do the front bumper, fenders, hood, and mirrors by the most reputable shop in St. Louis. I'm pretty sure it would be cheaper just to get the front end repainted in 5-10 years!
4runner TRD Pro
- Thread starter Trob20
- Start date
Good point. I was just quote at $1400 to do the front bumper, fenders, hood, and mirrors by the most reputable shop in St. Louis. I'm pretty sure it would be cheaper just to get the front end repainted in 5-10 years!
bravowhiskey
New member
Remote Start
I know everyone seems to dislike the factory remote start because of the engine shutdown when unlocking to open the doors but... i really don't mind it. I don't have a garage to park in, and it's a good distance from my front door to my truck so I actually don't mind the factory remote start. On a cold morning i'll take starting the engine and letting it warm up from the comfort of my house any day.. really not that much of a pain in the ass to have to restart the engine once you get in the truck... seems lazy to complain about that!
I know everyone seems to dislike the factory remote start because of the engine shutdown when unlocking to open the doors but... i really don't mind it. I don't have a garage to park in, and it's a good distance from my front door to my truck so I actually don't mind the factory remote start. On a cold morning i'll take starting the engine and letting it warm up from the comfort of my house any day.. really not that much of a pain in the ass to have to restart the engine once you get in the truck... seems lazy to complain about that!
shrub1
Member
You'd be wrong then. A good repaint of the hood, fenders, mirrors, frnt bumper would be much more than $1400.00.
I don't have a horse in this race because I don't have paint film, nor do I fret about minor paint imperfections on a truck.
dedonderosa
Member
ive never been more aggravated trying to get a vehicle in my entire life.
ive ordered cars many times from other manufactures with no problems and even the way i wanted with options, but toyota has to be stupid about it and not allow that, ive never heard of anything so stupid
sorry just venting, lol
ive ordered cars many times from other manufactures with no problems and even the way i wanted with options, but toyota has to be stupid about it and not allow that, ive never heard of anything so stupid
sorry just venting, lol
Concon40
New member
You obviously haven't tried to order a Bugatti. :rofl:
It's just a supply and demand issue.
gentlypfister
New member
Why?
UnicornPro17Cement
New member
Join Date: Mar 2017
Location: Beaverton Oregon
Posts: 2
UnicornPro17Cement is on a distinguished road
MY GARAGE
Brand new prototype revteck lift for pro
1.5 inch spacer in front and a small spacer in the back to keep the factory rake. which is not much.
We still get full extension and flex on all shocks and coils. "What we paid for"
Tire size suggested could possibly be a a 275/65/r18 -12 with no trimming and removing the front mudflap. Bassically something smaller then a 33" tires would be perfect so you can play with the numbers a little and your back spacing but to get all of your flex/body roll I wouldn't go bigger. Personal choice
I haven't been able to get tires on it yet this right after the lift but this Very very soon to be fixed. I'm thinking of either a toyo mt 275/65/r18 or a nitto ridge grappler 275/70/r18 -> the ridge grappler is a weaker tread tire so I should be able to get one size up but I'm probable getting the
"This lift will give it the look of a normal sr5 with a 3" suspension increase"
Here are some photos.
1- no lift
2- lift
3- spacer
4- rear spacer
Welcome to REVTEK SUSPENSION / 503-659-1650
"This kit is in production now, contact via email if considering and they'll tell you eta for your area"
Location: Beaverton Oregon
Posts: 2
UnicornPro17Cement is on a distinguished road
MY GARAGE
Brand new prototype revteck lift for pro
1.5 inch spacer in front and a small spacer in the back to keep the factory rake. which is not much.
We still get full extension and flex on all shocks and coils. "What we paid for"
Tire size suggested could possibly be a a 275/65/r18 -12 with no trimming and removing the front mudflap. Bassically something smaller then a 33" tires would be perfect so you can play with the numbers a little and your back spacing but to get all of your flex/body roll I wouldn't go bigger. Personal choice
I haven't been able to get tires on it yet this right after the lift but this Very very soon to be fixed. I'm thinking of either a toyo mt 275/65/r18 or a nitto ridge grappler 275/70/r18 -> the ridge grappler is a weaker tread tire so I should be able to get one size up but I'm probable getting the
"This lift will give it the look of a normal sr5 with a 3" suspension increase"
Here are some photos.
1- no lift
2- lift
3- spacer
4- rear spacer
Welcome to REVTEK SUSPENSION / 503-659-1650
"This kit is in production now, contact via email if considering and they'll tell you eta for your area"
Attachments
Things in life will be changing pretty dramatically over the next 6 months and decided the don't need a huge car payment and the real need for trd pro is probably not needed so probably going to look at an sr5.
Cement just hit the dealer this morning, so I need to make up my mind ....I was going to get the f(x) Pro wheel and was pretty much decided on the black but now was maybe going to the gunmetal. Matte Black is a no brainer (i know it looks good), the gunmetal on the other hand will be different but not sure how it's going to look with the Cement color and all the other black accents on the truck already....thoughts? ...yes, I know it's all subjective but someone may say something that I haven't thought of...one positive to the gunmetal is they should be easier to clean because of the finish vs the matte black.
First pic shows the black then gunmetal and then the silver ..then just the gunmetal and matte black
First pic shows the black then gunmetal and then the silver ..then just the gunmetal and matte black
Attachments
its not toyota, its the dealers that are optioning cars and telling people they cant get what they want. if the people buying would refuse to bend over and stop allowing the dealers to go in dry, things would be better. but apparently theres enough suckers out there that will take whatever they can get, pay over msrp, etc
my order is exactly what i went in to the dealer to purchase. i cant imagine paying money for things you don't want such as remote start, just because the dealer wants to sell it to you!
I found it on auto trader dot com. It came in that day. They were surprised that I found it since it was not in their inventory yet. I literally ran out the door as soon as they opened. I actually purchased an extra one they received. I beat out someone else by just minutes.
I found it on auto trader dot com.
TexasTJ
New member
I'm so tired of black, I wanted the gunmetal for my Cement but the fiancee likes the black wheels so they're staying.
Rocket61
New member
lol.
inlinejohn
New member
RUNTHAT
New member
I like the grill on your '10. Any details?
Toy4runpnoy
Member
Lucky, did you pay msrp or lower?
mrichard89
New member
Just got word from my dealer that my TRD Pro should ship from Japan on 4/7!!! Does anyone else have one coming over on that ship? I'm guessing it will probably be mid-May before it makes it to Missouri.
