5th gen Flowmaster exhaust on 4th gen? Compatible?

MojoRunner

MojoRunner

New member
Edit: Answer is Yes it does fit with a little tweaking from a muffler shop and Here's a short sound clip on YouTube of the 70 series Flowmaster catback system (Part #: 817569) on the 4th gen 1GRFE. I hope this helps curious minds: http://youtu.be/kUETwOmWKKI
I hope you enjoy (See post #15 for the full run down)

--------------------------------------------------------

I have a 5th gen buddy getting rid of an unused never installed Flowmaster Part #: 817569 Cat-back System 409S -Force II

Has anyone done this or seen this done? Couldn't find anything on the search function. Are the exhaust systems completely different? Slightly Compatible? I have a local exhaust guy that can work wonders but not miracles… has anyone seen a big block 70 series Delta flow on a 4th GEN? That's what this cat back system utilizes for a muffler.

flowmastermufflers.com 817569 link: edit- fixed link:
http://www.flowmastermufflers.com/?page_id=443&keywords=817569&x=22&y=17

Thanks, New guy...
 
Last edited:
Register to hide this ad
it probably won't be a direct fit. hangers are in different spots and the wheelbases are different. but with a little modification it may work
 
Almost anything will fit with a little modification! If you get it cheap enough, you can have your exhaust guy use what he can and scrap the rest. Of nothing else, just swap the muffler itself out
 
Thanks

Almost anything will fit with a little modification! If you get it cheap enough, you can have your exhaust guy use what he can and scrap the rest. Of nothing else, just swap the muffler itself out
cpark_12
Thanks for the input. Your right, prob should just go for it. It's a $500 system I can get for $50. I think I'll jump on it. My only concern is the big block 70. Never heard it on the 4th gen v6. I presume it'll be similar to the super 50 SUV model. I like a low moderate sound.


it probably won't be a direct fit. hangers are in different spots and the wheelbases are different. but with a little modification it may work
wnelax04sr5
Thank you. Yep, a little modification is sometimes all u need. I'll go for it.
 
From what I've heard, the 70 series is the least aggressive sounding flowmaster muffler. For $50, you really can't beat it! I'd definitely get it for that!
 
Did it!

Thanks cpark, thanks wnelax04sr5,
I just picked the cat back up from my buddy. I haven't really had time to look at it since it's raining here but it looks very doable. I'm excited to talk to my exhaust buddy and see what he thinks. Here's a pic. I'll have to give you an update when I have it installed. Really curious to see how it sounds. I am not going for the hey look at me I'd like to be a V-8 sound but I'd also like to hear a little bit more engine/throttle response when I'm accelerating without any drone. We will see.
 

Attachments

  • image.jpg
    image.jpg
    135.6 KB · Views: 1,400
aftermarket exhausts on the 4.0 v6 sound pretty good, not ricey at all. my gibson on my v6 is much throatier and has a bit of rumble at low rpm i wasnt expecting
 
Yep... It fit!

Yep... It fit!
I had the Flowmaster cat-back exhaust installed today and it sounds freakin awesome! I was really concerned about the 70 series FM because I've never really heard one on the V6 in person.
My short review so far: It sounds almost stock at idle but really has a nice refined deep throaty bellow in the lower RPMs during normal acceleration. Way better than the the FM 40 that I had on my 08 Taco. It had too much drone/ricey sound for my taste (no offense to any one). The 70 series FM is comparable to the Super 50 series SUV muffler.
If anyone's interested it's the Flowmaster 70 series big block with delta flow.
Another successful forum story!
Thank guys!
 
Sound clip video link!

Link: 2004 Toyota 4Runner 4.0L V6 with Flowmaster Part #: 817569 Cat-back System 409S -Force II - YouTube

Here's a short sound clip on YouTube of the 70 series Flowmaster catback system (Part #: 817569) on the 4th gen 1GRFE. I hope this helps curious minds.

The installation was no problem for my local muffler shop with a few tweaks. You could probably replicate a similar sound with just installing the FlowMaster 70 big block muffler (More cost effective) instead of the entire cat back exhaust.
-Just in case anyone's curious, other intake/exhaust modifications that I have on my truck include a K&N drop in air filter, hydrocarbon filter delete. (Not much impact if any on the sound) I also had them dump the exhaust tip out the passenger side behind the tire (Just a personal preference). Total cost of install was $130.00 with side exit exhaust tip mod.
Just note, this is done on my iPhone camera and is not the very best sound quality. It doesn't sound as raspy and high pitch in the higher rpm's as it seems in the video. However, no exhaust modification will make your V6 sound like a V-8. Just trade yours in for a V8 if a V8 sound is your goal. LOL! BTW, I would love to hear this FM 70 on the 4.7L V8. I would sound amazing IMHO.
 
Last edited:
Great to hear man! Careful, I just got my first speeding ticket because I was listening to the throttle response instead of watching my speedometer. Lol! Having the audible response makes it really tempting to play with the throttle/Exceleration a bit more these days. Enjoy!
 
Last edited:
You must log in or register to reply here.

Similar threads

lehiguy
Exhaust Stuff; Winners and Losers
Replies
0
Views
3K
lehiguy
lehiguy
W
Ultimate Storage & Sleeping System for Toyota 4Runner (4th, 5th & 6th Gen)
Replies
0
Views
2K
WHEELSFEELS
W
B
MagnaFlow Overland series exhaust - NEW
Replies
1
Views
3K
Battle Born Offroad
B
D
5th Gen LE JBL w/ Nav - works fine but I'd like more bass. Add sub? Upgrade sub?
Replies
5
Views
11K
Jeremy556
Jeremy556
J
5th Gen Exhaust on 4th Gen?
Replies
12
Views
18K
shurmack
S

Members online

Total: 581 (members: 3, guests: 578)

Forum statistics

Threads
278,316
Messages
3,554,113
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top