5th Gen Limited w/XREAS - Level?

[DonnieD]

Revtek Spacer Lift 2019 Limited

I just added the Revtek 3" front 2" Rear spacer lift to my 2019 Nightshade Limited :frog:and I am digging it, well once I was used to the slightly different handling.

Imgur: The magic of the Internet

 

[sawman1]

New here, and bringing this up again. As I have scoured the internet for how to video's on a level/ lift install be it Toytec, Revtek, Daystar, or Cornfed on a 5th generation 4runner with Xreas I continue to come up empty handed. For those of you who have completed a lift or level on an XREAS equipped 4Runner... are you guys compressing the coil inside the wheel well? I have downloaded the instructions for a Revtek 2.5 front/ 1.5 rear... but a visual aid sure would be helpful. Anyone know of a how to video out there?

This is what I used to install mine:

https://s3.amazonaws.com/roughcountry/install/92176700.pdf

 

[seLect]

Is there some reason why the 4Runner suspension is set up like it is, with the downward facing dog front end?

Think it has to do with weight distribution of the engine layout...could be wrong, though.

 

[ken4r17]

can you post pic? and did you upgrade tires?

 

[sawman1]

I just added the Revtek 3" front 2" Rear spacer lift to my 2019 Nightshade Limited :frog:and I am digging it, well once I was used to the slightly different handling.

Imgur: The magic of the Internet

Me too! Well, almost. I can't leave well enough alone. I removed the 2" front spacer and installed the Revtek 3" front preload spacer. I left the 1" rear in the back. It sits level. Pics attached (4R is parked just slightly uphill).

 

[DBOY T4R]

​

I got mine installed at a shop as well and cost around $500 with an alignment. I Personally I think the lift is perfect.

Did you have to do a BMC to fit the 285/70/17? I have some scs ray 10's with a -10 offset and want to go 285, but dont want to do a BMC.