A few suspension questions...

[ax2021]

I’ve got 650 Lb springs and 0 preload . Just like you said I wanted stiffer a tad. But it drives sooo... smooth with stock weigh I figure leave like this . And it gave me ~ 3” of lift

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

 

[ax2021]

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

 

[ax2021]

Sent from my iPhone using Tapatalk

Those are 285/70/17 fits just fine and no problems with balance them


Sent from my iPhone using Tapatalk

 

[Daikon]

Thanks for the picture, that's exactly the setup I was going to try out to replace my 6112/5160s. It looks perfect. What spring rate Kings do you have? I was probably going to stick with the 550# and I am curious how that will pair with the slightly firmer than stock 1" Eibach rear. How many threads of preload did you do in the front?

Driver side

Passenger side

 

[blefevre1]

Driver side

Passenger side

Thanks man! This will make the preload guessing game much easier

 

[Daikon]

Thanks man! This will make the preload guessing game much easier

It took about 30 mins of trial and error but you can adjust them on the truck as long as you take the weight off of them (jack the front end up)