Any7Offroad Skidplates

[mrtucker80]

Thanks,

I would love to "test out a set" but I am not local so changes would be tough, but I could probably live with it, or hammer it to fit if the price was right.

I will see if I can find them on FB tonight, who knows.

 

[crazydubman]

They are looking for some vehicles local that they can have for the day to test out and check for fitments. Drew and another customer I believe are bringing their 4runners down in the next couple weeks to do some more in house fitments to ensure that the corrections that were needed, have been addressed.

 

[TheeMikeB]

They are looking for some vehicles local that they can have for the day to test out and check for fitments. Drew and another customer I believe are bringing their 4runners down in the next couple weeks to do some more in house fitments to ensure that the corrections that were needed, have been addressed.

I'd be willing to help out on that, should I just email them? I'm in Walnut Creek.

 

[TheeMikeB]

Ahh found the facebook info and posted there so hopefully I'll be in for a discounted gas skid! I already have a full set of bud builts.

 

[crazydubman]

Right on Mike.

Glad to hear that they are getting some help with some test fitments.

 

[alaskaflyer]

couldn't find anything posted on FB. My front skids are rusted through so I will be contacting to get a price on the front skid set up.

 

[crazydubman]

couldn't find anything posted on FB. My front skids are rusted through so I will be contacting to get a price on the front skid set up.

Type out "any seven offroad" and you should be able to find it. The front skid they offer extends back to the sway bar cross member behind the steering rack. Should work out really well for you.

 

[crazydubman]

Sucks to hear that man

How angled is your panhard bar? I've always wondered if you dropped the panhard bar mount enough to make it horizontal at zero articulation, if it would pull the driveshaft away from the skid due to the arc the panhard makes when you flex. I'm pretty sure [MENTION=21950]sn0wrunner[/MENTION] old rig had its panhard mount pretty low. Maybe he can chime in

Long time waiting but thought I would close the loop on the panhard question.

 

[TNRunner99]

Has Any7Offroad gone out of business?

 

[cvnvn]

Really diggin the front skid. Can you run just front skid without the crossmember reinforcement?

 

[crazydubman]

Has Any7Offroad gone out of business?

Unfortunately I believe so. Last time I spoke with Darren he had mentioned that any7 was not really moving forward. He had recently gotten back in to his old profession in IT. He might still do side projects but as far as I know, any7 is no more.

 

[crazydubman]

Really diggin the front skid. Can you run just front skid without the crossmember reinforcement?

The front skid tied into the crossmember that mounts to the swaybar mounts. No real way to get around that. There are mounts where the factory skid mounted but the skid also covered the steering rack behind it.

 

[TCMach]

Unfortunately I believe so. Last time I spoke with Darren he had mentioned that any7 was not really moving forward. He had recently gotten back in to his old profession in IT. He might still do side projects but as far as I know, any7 is no more.

That's a real bummer. I picked up their gas tank skid right after you got yours done and Darren was really great to deal with.

 

[TNRunner99]

Unfortunately I believe so. Last time I spoke with Darren he had mentioned that any7 was not really moving forward. He had recently gotten back in to his old profession in IT. He might still do side projects but as far as I know, any7 is no more.

You know if he would still make parts? Looking for a gas tank skid in a few months.