Biggest Light bar that can fit in 2015 limited lower grille?

[DCook0]

Many of you are probably thinking "Just go measure it dumb @ss", but I'm deployed and nowhere near my 4Runner right now and I'd like to take advantage of the Black Friday/cyber Monday deals they have going on right now.

So, does anyone have a 2014-15-16 limited that can measure the lower grille, or has anyone already put a bar in the grille of the limited and can share their findings/problems/install methods?

Thanks for the help!!!!!!!!!

-Dave

 

[flatspin]

Just measured mine (2014 LE) and I have 39" wide, 4" tall.

 

[The Waco Kid]

Many of you are probably thinking "Just go measure it dumb @ss", but I'm deployed and nowhere near my 4Runner right now and I'd like to take advantage of the Black Friday/cyber Monday deals they have going on right now.

So, does anyone have a 2014-15-16 limited that can measure the lower grille, or has anyone already put a bar in the grille of the limited and can share their findings/problems/install methods?

Thanks for the help!!!!!!!!!

-Dave

There's an inner air dam that measures a little more than 30 inches. A 30 or 32 inch bar may require trimming of the air dam, depending on make and total size (including mounting hardware).

I know this isn't a limited, but behind the bumper I'm pretty sure there's not much, if any, difference. http://www.toyota-4runner.org/5th-gen-t4rs/196090-mbumpus11-new-build-thread-need-input.html#post2144960

 

[mbumpus11]

There's an inner air dam that measures a little more than 30 inches. A 30 or 32 inch bar may require trimming of the air dam, depending on make and total size (including mounting hardware).

I know this isn't a limited, but behind the bumper I'm pretty sure there's not much, if any, difference. http://www.toyota-4runner.org/5th-gen-t4rs/196090-mbumpus11-new-build-thread-need-input.html#post2144960

@TheWacoKid is right - I installed a 32" bar behind my grille ('15 TEP) and had to trim both air dams to make it fit. If you don't want to trim, most you could get would be a 30" and even that would be a squeeze.

 

[Mistaken]

A 30" should fit fine and not require too much trimming, from what I have seen on here.

 

[DCook0]

Thanks for the input!
I think I'll go with a 30.
Time to start saving