Bilstein TRD Pro suspension kit on sale PTR13-35140

[Tallman]

I was considering this set-up but have decided to go another way. I found one set at Toyotapartspeople -- didn't check out but it was listed and went into a cart.

 

[bhibbert80]

I’m interested in taking one of these off of someone. Throwing it on a 2018 TRD ORP.

 

[VmaxEngage]

You can replace the front FJ shocks with TRD PRO shocks and keep the FJ springs. FJ shocks mount the springs lower than TDR PRO shocks. The FJ springs are longer by 1" and stronger than TRD PRO.
This will give you another inch in the front - I think :shrug:
For rear there are several options mentioned in this thread. My Eibach gave me another 3/4" vs OEM springs, so I sit now at 37 3/4" on the rear for a perfect front rake (unloaded car) and almost front-rear level with car loaded with 2 adults, 2 kids and and loaded trunk.

Thank you!

I forgot to clarify, I was asking for front springs. I'll have to edit my post.

 

[Ocean Hitchhiker]

I’m selling my kit, less than 5k miles on it. Kit will come with toytec bottom spacer and T13 wheelers rear springs. Front coil overs will be already built, not taking those apart. Paid 900 for the whole setup looking to get 750. Happy to ship, but buyer covers shipping. Located in Dallas.


Sent from my iPhone using Tapatalk

 

[4RunnerFlex]

Anybody selling a kit or know a dealer that might have this in Los Angeles area?

 

[mlnhtrang]

Anybody selling a kit or know a dealer that might have this in Los Angeles area?

ebay.

 

[4RunnerFlex]

ebay.

They want $1k

 

[UTKSmokey]

Powder coat 6112 springs and adjust to taste.

 

[4RunnerFlex]

So I ended up getting a set at Tustin Toyota and I also picked up SPc UCA and ICON 2” rear coil. I’m trying to read through the thread but can’t seem to find the answer to my question. Would I need to change the front coil to get 2.5” lift so I can fit 285 70 17 ridge grapplers. I have 4R TRD Off-Road with KDSS. Thanks in advance guys

 

[blksubykid]

So I ended up getting a set at Tustin Toyota and I also picked up SPc UCA and ICON 2” rear coil. I’m trying to read through the thread but can’t seem to find the answer to my question. Would I need to change the front coil to get 2.5” lift so I can fit 285 70 17 ridge grapplers. I have 4R TRD Off-Road with KDSS. Thanks in advance guys

Did you get the 6112 or the TRD FJ suspension kit?

 

[4RunnerFlex]

Did you get the 6112 or the TRD FJ suspension kit?

I believe it’s the the FJ one

 

[yardsale]

I believe it’s the the FJ one

Probably have to get the Toytec coil spring seat, good for one inch and a 1/4 inch top plate spacer to get your 2.5 inches total (including the inch you get with those new coilovers.

 

[4RunnerFlex]

Probably have to get the Toytec coil spring seat, good for one inch and a 1/4 inch top plate spacer to get your 2.5 inches total (including the inch you get with those new coilovers.

https://bilsteinlifts.com/shop/toyo...MI_4uxvdi03gIVi8VkCh2P7QqmEAQYBSABEgKL4vD_BwE
So I’ll have to get this product?

 

[Edwin562]

They want $1k

many private sellers sell their take off trd pro suspension close to that price. I been on the prowl for a reasonable kit.

 

[2016 4Runner SR5]

Now that the $600 kits on clearance from Toyota are gone, the cost of used has gone back up to where it used to be. Supply and demand, just how it works.

 

[4Yoda]

Anyone running cornfed spacers? How they working out?

 

[2016 4Runner SR5]

Anyone running cornfed spacers? How they working out?

I've run multiple sets with zero issues.

 

[nelly13b]

Anybody selling a kit or know a dealer that might have this in Los Angeles area?

Selling mine for $600

 

[Rainier42]

Selling mine for $600

Just sent you a PM.

 

[Neauxla]

Anyone know is 225/80R17s will fit with this kit w/o spacers?