Brakepad check at 32,000 Miles, 80,000+ Miles,101,000 Miles

Everybody else sees this.
4Runners go through rear brake pads much (much!) more quickly than fronts. If you have fronts wearing faster, check your rear slide-pins ...
I’ve heard from friends that they had rears wear out first. Is it possible they changed brake bias early on?
 
Finished the rear brakes last Wednesday. One thing I noticed was odd about the design, there are no return springs on the pads. The inside pad wore down quicker than the outside. The inside is the one that has the wear sensor clipped to it. The sensor makes that pad fit tighter in the bracket. I think that configuration makes the inside pads drag on the rotor and wear faster. Especially the side of it with the wear sensor. But who knows for sure?
 
Brakepad check at 32,000 Miles, 80,000+ Miles,101,000 Miles, 135,000 miles

Look good to me.
Didn't bother measuring.
I'll probably check them again at 100k. :)









Getting over a hundred thousand miles out of factory pads and rotors really comes down to coasting early and keeping the caliper slide pins greased. When I pulled the wheels off my 2016 trail rig at 85k last month, there was still plenty of pad material left, though I started pricing out replacement hardware just to have on the shelf. Checking CARiD reviews before ordering helped me verify part numbers and avoid fitment headaches, so I ended up sticking with OEM shims and silicone paste.
You can tell the brake pads are original; a fake would have worn down quickly.
 

Members online

Forum statistics

Threads
278,491
Messages
3,551,623
Members
248,194
Latest member
erinobr2000

Trending content

Back
Top