cbielat's 2011 SR5 Build Thread

There definitely were a lot more better trails and sections we didn't get pictures of. It just gets annoying to keep stopping every so often when the whole crew is making quick work of more technical sections. Just want to keep the momentum moving along. But every time we say to each other, "damn, I wish we had taken some pictures of that line or that section". Never fails. That's why we need an "Overlander" with us lol. They're good for taking a shit load of pictures.

Haha, I hear that. I say that as a guy who likes the more difficult trails but also likes taking pics of things too.
 
Ocean State Jeepers Toy Run 12/3/17

Ocean State Jeepers Toy Run. Unfortunately, not many action shots were taken. Seems to be a reoccurring theme.
 

Attachments

  • IMG_0103.jpg
    IMG_0103.jpg
    137.9 KB · Views: 420
  • IMG_0104.jpg
    IMG_0104.jpg
    136.2 KB · Views: 427
  • IMG_0131.jpg
    IMG_0131.jpg
    135.5 KB · Views: 418
  • IMG_0130.jpg
    IMG_0130.jpg
    135.9 KB · Views: 420
  • IMG_0129.jpg
    IMG_0129.jpg
    138.6 KB · Views: 416
  • IMG_0132.jpg
    IMG_0132.jpg
    140.2 KB · Views: 408
  • IMG_0114.jpg
    IMG_0114.jpg
    143.8 KB · Views: 416
Ocean State Jeepers Toy Drive continued
 

Attachments

  • IMG_0128.jpg
    IMG_0128.jpg
    137.4 KB · Views: 409
  • IMG_0127.jpg
    IMG_0127.jpg
    142.7 KB · Views: 420
  • IMG_0123.jpg
    IMG_0123.jpg
    144.9 KB · Views: 420
  • IMG_0126.jpg
    IMG_0126.jpg
    136.9 KB · Views: 405
  • IMG_0125.jpg
    IMG_0125.jpg
    138.3 KB · Views: 395
Replaced Tail Light 12/6/17

Threw in the 3rd new tail light(factory oem). Needed everything(housing, clips, sockets, nuts and bulbs). The damage caused a larger gap between the light housing and rear quarter panel sheet metal when installed. Until the next time...
 

Attachments

  • IMG_0143.jpg
    IMG_0143.jpg
    138 KB · Views: 605
  • IMG_0144.jpg
    IMG_0144.jpg
    135.5 KB · Views: 613
[MENTION=76550]cbielat[/MENTION] have you run into any clearance issues with your spare tire being in the stock location while wheeling? Looking into getting a metal rear bumper and a rear tire carrier isn't really a viable option with a full time bike rack. Wanted to hear your thoughts since you seem to use your 4runner thoroughly :)
 
[MENTION=76550]cbielat[/MENTION] have you run into any clearance issues with your spare tire being in the stock location while wheeling? Looking into getting a metal rear bumper and a rear tire carrier isn't really a viable option with a full time bike rack. Wanted to hear your thoughts since you seem to use your 4runner thoroughly :)

I don't have my spare in the factory location. It's a 35 so it won't fit. When I had the 33s, I kept one in that factory location. Just had to let more air out of it and then shove it between the aftermarket bumper's hitch and my aftermarket beefier panhard bar. I'd notice at times that it did drag here and there on certain things.
 
Threw in the 3rd new tail light(factory oem). Needed everything(housing, clips, sockets, nuts and bulbs). The damage caused a larger gap between the light housing and rear quarter panel sheet metal when installed. Until the next time...

Damn, now I don't feel so bad about the dent in my rear passenger door. Still can't figure why someone put that tree there.
 
Only took me a couple of years but I finally went through your thread. Well done indeed and nice to see you enjoying RC.

Although you may want to take better care on your choice of friends. :kiss:
 
I don't have my spare in the factory location. It's a 35 so it won't fit. When I had the 33s, I kept one in that factory location. Just had to let more air out of it and then shove it between the aftermarket bumper's hitch and my aftermarket beefier panhard bar. I'd notice at times that it did drag here and there on certain things.

Ahhh....got it. Where are you storing your spare tire now? Any regrets in not going with a spare tire carrier?
 
Only took me a couple of years but I finally went through your thread. Well done indeed and nice to see you enjoying RC.

Although you may want to take better care on your choice of friends. :kiss:

Ha, nice. You must be referring to Pat and Jeff. [MENTION=47340]Titanpat57[/MENTION] [MENTION=65614]Antman[/MENTION]
 
Ahhh....got it. Where are you storing your spare tire now? Any regrets in not going with a spare tire carrier?

This is where it's been for years now. I guess I've gotten used to it. Only thing that gets annoying is whenever I have to change the tire while on a long trip(which happens often lol), I always have to take out my tent cot that I strap down to the tire which you can see in the bottom photo.
 

Attachments

  • FullSizeRender-4.jpg
    FullSizeRender-4.jpg
    136.6 KB · Views: 480
  • 22045791_1956020514668863_1080901467441465588_n.jpg
    22045791_1956020514668863_1080901467441465588_n.jpg
    141.9 KB · Views: 479
Odyssey Battery 1/12/18

Odyssey Extreme Battery
 

Attachments

  • IMG_0307.jpg
    IMG_0307.jpg
    136.5 KB · Views: 426
  • IMG_0315.jpg
    IMG_0315.jpg
    138.3 KB · Views: 405
Passenger Side Front Wheel Bearing/Hub Replacement 2/10/18

Passenger side front wheel bearing/hub replacement
 

Attachments

  • IMG_0454.jpg
    IMG_0454.jpg
    136.8 KB · Views: 361
Driver Side Front Wheel Bearing/Hub Replacement 12/2/17

Driver side front wheel bearing/hub replacement.
 

Attachments

  • IMG_0482.jpg
    IMG_0482.jpg
    130.1 KB · Views: 360
What brand bearing did you go with? When I had to replace one of my rear bearing/hub assembly I ended up going with Koyo Japan unit.
 

Members online

Forum statistics

Threads
278,309
Messages
3,554,075
Members
248,016
Latest member
Advally Service

Trending content

Back
Top