Changing the 07 JBL Navi Sound system, Help pls!!

[johnh7]

Ok guys so i bought a 07 4Runner Limited, JBL Navi etc for my wife before i left for afghanistan, I also own a 2007 Tacoma TRD Sport a 85 Supra and a 72 FJ40 wich i bought before Iraq, I love toyota, im a big fan of them

I have in the tacoma and my supra a Pioneer Avic D-3 with all the goodies(bluetooth, ipod, etc) and my wife hates the factory JBL Navi on it and she wants a Avic D-3 in hers...

So i bought her a Avic d3 with everything and im trying to figure out what modules do i need to buy for the steering controls to work, the JBL amp and speakers etc.... there seems to be alot of options on the wed for these but i just want to make sure from somebody that has done this before.

can anybody help me pls....

Thanks guys

John Huber

 

[gaterose]

I use a PAC- Audio steering wheel interface, I use swi-jack but you would use swi-ps for the pioneer.

I've also used pac audio PAC-TATO and scosche ta07sr for connecting the radio to the JBL amp, both seemed to work about the same to me.

 

[ARK_SWAMP_RIDER]

Most go with one of two companies, Pac (mentioned above) or Metra. The Metra items are TYTO-01 for the harness and ASWC for the steering wheel controls. I'm not really aware of any major differences. I've got a Pioneer h/u on order along with the Metra install items, I'll be replacing the OEM nav in my 03. I should have that done this week and I'll report back.

 

[johnh7]

so i got the instal done all the buttons on the steering wheel work except for the voice command button, all i can get it to do is to lower the volume but my wife doesnt care as long as the vol up and vol down and seek up and seek down, answer call and hang up call works, i put the GPS antena on the back by the hatch and ran the wire through the head liner so all in all its a great set up and im suprised i did such a good job...(lil pat on my back) i removed the factory aux plug in the glove box and ran the ipod cable through there and used black silicone to cover up the whole....

now my thing is i have the pioneer back up assitance camera on my tacoma since its lifted any car thats smaller than a rav4 i cannot see so i instaled it on my truck and love it and i know my wife loved her factory back up camera... but obviusly the Pioneer doesnt have a plug to re-use the factory camera it has a single RCA so im trying to find out how to wire the factoy back up camera to a single RCA and wire the posi and negative for the power so if anybody has this info that wouldnt mind passing it along so i can get it working, id rather try to get the factory one working cuz it would be cheaper and a cleaner install....

Thanks guys...