Chudiddy- Inferno TRD PRO Build

[C4 Fabrication]

Not yet. Should arrive Tuesday!! Anxiously awaiting!

good deal, they are going to look great on your rig! Are you painting them or having them powder coated?

 

[MudPie]

[MENTION=62757]chudiddy[/MENTION]

Would you mind posting a shot of your driver's side front strut so I can see how your toytec lift kit was installed? Just had mine done by the dealer but it looks nothing like the instructions.

 

[Ike64]

@chididdy did you happen to notice if the springs with Toytec lift could handle more weight? Also how bad was it getting the wheels realigned after the lift? I'm thinking of going this route with my Pro

 

[chudiddy]

[MENTION=62757]chudiddy[/MENTION]

Would you mind posting a shot of your driver's side front strut so I can see how your toytec lift kit was installed? Just had mine done by the dealer but it looks nothing like the instructions.

Hope this helps..sorry for delay!

 

[chudiddy]

@chididdy did you happen to notice if the springs with Toytec lift could handle more weight? Also how bad was it getting the wheels realigned after the lift? I'm thinking of going this route with my Pro

Handles the added weight no problem. If you were upgrading the entire bumper then I would suggest changing out the springs to handle the heavier load. Alignment was also not a problem. I get slight rub but only in reverse at full lock.

 

[chudiddy]

I love that PA tag, I might get one just because of the color

Yeah I got extremely lucky I was able to find one on Ebay that wasn't "dead" and could still be registered. One of the perks of working at a dealership..I could check the status of plates. Some people were asking $500 plus for these plates that you couldn't even use anymore. I picked mine up for less than $100 bucks.

 

[rallybabyracing]

Yeah I got extremely lucky I was able to find one on Ebay that wasn't "dead" and could still be registered. One of the perks of working at a dealership..I could check the status of plates. Some people were asking $500 plus for these plates that you couldn't even use anymore. I picked mine up for less than $100 bucks.

Is there a way for people without dealership access to check if a tag is "dead"

 

[chudiddy]

Yes I work at a Toyota Dealership. I don't think there is any way to access that info otherwise.

 

[chudiddy]

Received my Sliders and Fuel tank skid from [MENTION=131444]C4 Fabrication[/MENTION] and I must say that the workmanship and the attention to detail are second to none. These are a work of art and I am thoroughly impressed. I can't wait to get them installed. Huge kudos to C4 for the fast turnaround time and great communication. Check these babies out...

I apologize for the iPhone pics. I'll get better ones when they are installed.

Beefy

Removable Step Plates

Those welds...

Nice added little bonus!!

Right now they are being prepped for paint. Should be going on within a few days. Stay tuned...​

 

[Ike64]

Me want those sliders!!!

 

[Lava rocks]

I want the gas tank skids, gotta save a few more $ tho!

 

[C4 Fabrication]

Thanks for posting up pics [MENTION=62757]chudiddy[/MENTION] ! Thanks for all the great comments, cant wait to see them on your beautiful runner! :rockon:

 

[C4 Fabrication]

Also did i send you an email with install instructions and pics yet? Im still working on getting those posted to my vendor forum.

 

[chudiddy]

Also did i send you an email with install instructions and pics yet? Im still working on getting those posted to my vendor forum.

No I haven't gotten that email yet. Kindly send it please. Thanks

 

[C4 Fabrication]

Just posted up these install instructions on my forum. Hopefully these will work for you!

http://www.toyota-4runner.org/c4-fabrication/214228-install-instructions-c4-fab-fuel-tank-skid.html

http://www.toyota-4runner.org/c4-fabrication/214225-install-instructions-c4-fab-rock-sliders.html

 

[Engineer]

That Gas tank Skid looks HEAVY!

 

[C4 Fabrication]

That Gas tank Skid looks HEAVY!

62lbs of the best fuel tank protection you can find on the market!

 

[chudiddy]

All primed up!!

 

[chudiddy]

All painted up....getting close now.

Decided to go Satin Black on the Fuel tank skid. It will get pretty roughed up so this will make it easy to touch it up.

 

[C4 Fabrication]

Lookin good! :nod: