Control Arm Bushings in bad shape!

[PCF4runner]

Not all 3rd gens have replaceable bushing in the lower control arm (you don't say what year yours is...)
My 96's captive bushings (top) compared to the '02's replaceable version (bottom):

I got a junkyard set of lower control arms out of a low mileage 02 that had bushings in good shape. Will drive on them until they wear out and be able to replace them when needed.

Mine is a 2002 SR5 4wd, I'm thinking maybe i should do the same look for a used set in good shape and swap them out. Thanks for your input appreciate it.

 

[hugo2go]

Thanks for the info Chuckles !!!!

 

[Chuckles89]

Since I have to replace my driver's side rear LCA, I'll try and make an instructional video. I'll do it tonight if I have time.

 

[Chuckles89]

Here's my video. I put all the steps in it, but if y'all have any questions, just ask!

<iframe width="560" height="315" src="https://www.youtube.com/embed/7kTybhyoKnY" frameborder="0" allowfullscreen></iframe>
[MENTION=5345]habanero[/MENTION] [MENTION=115760]PCF4runner[/MENTION] [MENTION=71030]T4R2014[/MENTION]

 

[19963.4lsr5]

I bought the Febest bushings off Amazon for the lowers on the 96 and purchased complete Febest uppers from Amazon. Febest had complete lowers also.

When the 97 Puppy Hauler needs them I will just purchase the complete Febest uppers and lowers.

 

[PCF4runner]

Thanks for sharing buddy!! [MENTION=97483]Chuckles89[/MENTION]