Cornfed lift installed with disconnecting X-reas

mole177 · 2007-08-08T04:52:12+00:00

I went ahead and installed the 3/2 spacer lift and disconnected the X-reas in the process. The only amt of fluid that was lost were one small drop on the passenger side at most. at first i thought it was filled with a fluid, however on the x-reas canister said it was filled with a gas. but then once we disconnected the line it was fluid indeed. It is safe to disconnect the X-reas. pictures to be posted tomorrow on where to disconnect the line. It was done on a lift with my lexus tech friend and myself. If you guys still don't feel comfortable disconnecting the lines for service of any sort with the suspension, just simply don't disconnect it. total time was approx 3hrs including an alignment and shop tools... def could not of done it so quickly with out the use of shop tools and lift.

Thread starter mole177
Start date Aug 8, 2007

boozng

New member

Apr 28, 2009

climb.on said:
Nope. The opposite. Turn the red. If the bracket is still attached, you don't really need to hold the green either. It's not that tight. I used a large crescent wench. My biggest open ended wrench is a 20mm and this must be 21mm.

I see, thanks for the clarification. I'm about to install my OMEs soon, and I'm trying to find out as much as I can before ripping things apart. haha.