crashman build thread 05 sport

[crashman]

Hey did you have the Factory JBL System with the stock sub woofer in that location? Just wondering before I make a custom enclosure for upgraded Alpine type R.
Thanks!

I had the factory job system but it has all been removed even the amp to make room for the bigger sub
I did however use the power from the amp to require the rear power outlet to stay hot all the time
I still have the factory speakers in my garage except for the dash speaker I use it for my CB

 

[magert54]

I look forward to a summer run of the front range crew. Maybe this time we can get more then 25 rigs.

 

[rickashay]

Hi rickashay
Sorry I haven't been on here for a while
Yes I had to custom cut bolts for this I went with button head hex and made them go almost to the bottom of the holes, I have been off road with these and hit them a few times, bent one in pretty good and the bolts held up I bent the ring back in shape and all is good so far

Good to know and thank for getting back to me. I ended up just dropping the coin for the real deal. Stoked to get some tires on and even more stoked to get some miles offroad at low psi!

 

[btizz17]

I had the factory job system but it has all been removed even the amp to make room for the bigger sub
I did however use the power from the amp to require the rear power outlet to stay hot all the time
I still have the factory speakers in my garage except for the dash speaker I use it for my CB

Perfect, Thanks for the info!

 

[crashman]

I finally got my rear bumper trimmed!

So after having my tires chewed up when my wheel is stuffed from my bumper I went to Jon from The Flop Shop and had him cut my rear bumper. I can't say enough good things about them and there work! Not only did he cut the bumper but he made a plate to keep the mud out of the inside back of the bumper

 

[crashman]

It shows up better after it got dirty from driving home in the rain

 

[crashman]

The welds match the original welds

 

[crashman]

The removable plate

 

[crashman]

Another

 

[momo.75]

Looks good. When i upsize my next set of tires I will have to do the same. i wish i had done like [MENTION=1422]the_josh[/MENTION] and had CBI change the angle of that part when they were fabricating it.

 

[6wheelin]

I'm going to use this picture in the event my other half complains about a new rear bumper.

 

[apohl17]

Just read through your build [MENTION=75144]crashman[/MENTION] and felt the need to bump it up after almost 2 years of it being in hiding! This rig is... :flamethrwoer2:

 

[crashman]

Thanks yeah I need to get out more and wheel I have been crazy busy
I have Some more things I need to get updated and installed