CRB Racing Build 2.0

What wheel spacers are you running (or wheel backspacing) to clear the Fox 12” 2.5’s? I have to imagine it’ll take some decent clearance to get it to not make contact on the tire side of things when flexing and stuffing the tire. The frame notch clearance looks like it’s enough but I’d like to see exactly how much room was made after the plating is done. I run 35” tires and have the same OSR with Fox 12” 2.0” waiting to go on when my lazy ass gets around to it, but I’ve also thought about just bumping the shocks up to 2.5’s before hand so I’m not doing things twice. Very interested in the final results!
 
Dezert4Runner said:
What wheel spacers are you running (or wheel backspacing) to clear the Fox 12” 2.5’s? I have to imagine it’ll take some decent clearance to get it to not make contact on the tire side of things when flexing and stuffing the tire. The frame notch clearance looks like it’s enough but I’d like to see exactly how much room was made after the plating is done. I run 35” tires and have the same OSR with Fox 12” 2.0” waiting to go on when my lazy ass gets around to it, but I’ve also thought about just bumping the shocks up to 2.5’s before hand so I’m not doing things twice. Very interested in the final results!
Click to expand...

[MENTION=68460]Dezert4Runner[/MENTION] there is a lot of room for the 2.5s. I’ll post some pictures when I get everything back together.
For now, I’m bored watching paint dry!
a0ed63c79043399af2e6c21492a35e31.jpg



Sent from my iPhone using Tapatalk
 
Growing up in Hawaii, if you could fit three fingers inside, was almost guarantee! [emoji1787]
1524b4462b31afbbed35fc6f605a5963.jpg



Sent from my iPhone using Tapatalk
 
Very nice. Cant wait for the ride report. I'll bet that's going to be a whole new level of how good it all works with that much dampening available.

Kind of the whole reason I haven't entertained the shock relocate up to this point due to the limitation of width on the body. This is definitely one way to resolve that.
 
Romeo1 said:
Very nice. Cant wait for the ride report. I'll bet that's going to be a whole new level of how good it all works with that much dampening available.

Kind of the whole reason I haven't entertained the shock relocate up to this point due to the limitation of width on the body. This is definitely one way to resolve that.
Click to expand...


The ride is smoooooth! Bumps that would upset the suspension and have the rear bucking are nonexistent now!


Sent from my iPhone using Tapatalk
 
I’ve always had an issue with the driveshaft making contact with the fuel tank skid while wheeling, but now since installing the eimkeith pck and centering the rearend housing and added travel, the driveshaft and fuel tank skid were making contact while making right turns.

Freelgood Performance recommend getting a Lilskiosoffroad fuel tank skid.

Lil' Skip's Offroad | Fabricating parts for the offroad enthusiast

I placed the order and in less than a week, I got the issue sorted out!

8bcb3eadae2a20d14d799c1eb5d11105.jpg



Sent from my iPhone using Tapatalk
 
Got into a little fender bender, correction, frame bender…

I got a replacement frame. Going to attempt the frame swap in my driveway with no lift.


Sent from my iPhone using Tapatalk
804829f6e110be3151a52bc81ddb85cd.jpg
 
You must log in or register to reply here.

Members online

Total: 707 (members: 4, guests: 703)

Forum statistics

Threads
278,313
Messages
3,554,090
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top