Daystar 2.5/1.5 leveling & reverse rake??
- Thread starter supratt
- Start date
Remember there are two spacer lifts. One goes on top of the front struts (no preload) and one goes in between the spring and the top of the strut (preload).
Mine was the on top (no preload) version and I still have a bit of a forward rack (nose sits a bit lower).
Mine was part # KT09134BK btw.
Mine was the on top (no preload) version and I still have a bit of a forward rack (nose sits a bit lower).
Mine was part # KT09134BK btw.
TEPUI
New member
Luckily mine resulted leveled, but will probably get a bit of reverse rake with cargo.
Sent from my iPhone using Tapatalk
Pancho1115
New member
So to fix the possible reverse-rake look, it seems that the 1.5" spacer offered by Daystar needs to be replaced by a 2". That said, I looked on the Daystar website, and found no 2" spacer offered for the 5th Gen T4R.
I did see the 2.5" spacers offered as a single item (front kit only as opposed to front & rear kit combined), but not the 2" rears.
Am I just not seeing it? :shrug:
I did see the 2.5" spacers offered as a single item (front kit only as opposed to front & rear kit combined), but not the 2" rears.
Am I just not seeing it? :shrug:
I'm not seeing that there is a problem. There are a ton of people who've installed these and this is the first time I've heard of a reverse rake. I'm betting more on a bad installation.
The only way I'd have reverse rake is if I loaded down the back of the vehicle. Mine doesn't have a 3rd row or anything back there. Do the people who are saying there is a reverse rake have anything that might be weighing down the back?
