• If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.

    1. Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
    2. All Threads must contain the following information
      • What is for sale/trade (model, specs, etc.)
      • Condition
      • Price/What you want to trade for
      • Location of item
      • At least one picture of the item for sale or for trade
    3. No "Feeler" Threads - Its either for sale or it isn't.
    4. Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
    5. Threads not complying with the rules will be deleted without notice.

Drifter cb mounts, 3rd,4th,5th, and fjcs!

Sent PM. Interested in a 5th gen drivers side. Hoping for as clean of an install and look as possible.
 
Mock ups of the 4th and 5th gen mounts are up. Bear in mind these are just sheet metal where the mounts will be fully welded steel (I believe we are going with 10 guage) with the t4r cut out (or fj)
 
579e6bbc3fd798a180fd576fbe1207da.jpg

Guess what's in the box!
 
Styer said:
Amazon prime so its either a reuse of the box for a prototype or CB goodies.

BTW that 5th gen mount mock up looks great. How's the "grounding" situation on it?
Click to expand...
It's new parts a promise. The 5th gen we were testing on didn't have a cb installed yet, but it will be mounted to metal similarly to the 3rd Gen so I don't see grounding being an issue. But it's something I will try to test
 
Asaspades93 said:
Mock ups of the 4th and 5th gen mounts are up. Bear in mind these are just sheet metal where the mounts will be fully welded steel (I believe we are going with 10 guage) with the t4r cut out (or fj)
Click to expand...

Hey Asa - updated photos?
Hope you had a good Christmas.
 
Asaspades93 said:
Yep. It was the only place we could mount it without drilling anything. It mounts onto the top strut mount
Click to expand...

Hmmm. Have you been able to test the swr there? I had terrible results with the hatch mount I had previously. Was really hoping for something similar to the 3rd and 5th gen down around the bumper. Have you considered between the bumper and the tail light? There's been a couple guys that have put them down there. The only problem is that the 06-09 has a different slope from the 03-05 rear end.
 
Haven't been able to test it yet, but I'll see what I can do. We were originally hoping to have it by the bumper similar to the 3rd Gen but couldn't find a good/simple way. I was talking with a guy who had his mounted down under the taillight and he was getting rid of it since it was too loose for his liking and was hard to install. I'll see if I can figure another way out though
 
Asaspades93 said:
on the 28th we will be giving away a surprise related to the mounts. Everyone who has committed by then will be entered into the random drawing and a winner will be picked that night

Asa
Click to expand...

So don't hold out on us. What's the big surprise?
 
I'm not gonna pick a winner til tomorrow just cause I forgot to link another thread to this. I promise it'll happen tomorrow
 
You must log in or register to reply here.

Members online

Total: 585 (members: 5, guests: 580)

Forum statistics

Threads
278,316
Messages
3,554,107
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top