Fender Liner Part Number(s)

[RickC]

What was the name of thiese parts? I need fronts for my "05 sport and the link is dead. Is it something that's easy to change with the tires on and the truck on the ground? I too can't stand seeing through to the engine, though I'm sure these are pretty much just cosmetic.

Look at my post about 4 before yours. They are called fender aprons.

 

[Porqupine82]

No I didn't.....I ended up going cheap and getting some pond liner (as recommended by others) and cutting my own. Not the prettiest but it's functional and not something that is really seen.

What'd you use for the pins that hold it in place?

 

[Inv4drZm]

I made mine from 1/16" EPDM rubber sheet from MSC. I traced my old ones 1.5" higher for my body lift, reused the same clips in small square holes I cut with scissors, and it turned out perfect. Still look identical to the pictures months afterward, so far.

 

[ARK_SWAMP_RIDER]

What'd you use for the pins that hold it in place?

I just reused the stock clips. There were a couple that broke and I replaced with some generic ones from the parts store, they worked although a bit small.

 

[Bumbo]

I could actually use some of those... not sure why they are gone but I suspect going wild off-road had something to do with it.

Probably bottomed out and tore then off or had a lot of steering input when the suspension compressed.

 

[luismlcabrera]

Great post !!!

Was looking for something like this for the 5th gen 4Runner but couldn't fin anything except

--> Toyota 4Runner Fender Apron Shield Liner Splash Guard Complete Set Template Pdf | eBay.


Does anyone have it?

Please send me a private message.


Thanks.