First Mods

[Milam]

I pick up this 4runner this past week and just had the following finished up today. Daystar 2.5F/ 1.5R, 265/70/17 BFG AT KO, 1.25 inch Spidertax

Before

After

 

[matroe11]

that's a big difference! Nice look!

 

[chudiddy]

I want this exact setup. I already have the lift done just waiting for the tires to wear out so i can get same size/brand tires and spidertrax. I just want to know if there is ANY rubbing at all. Nice truck btw!!

 

[Milam]

Yea there was...4wheel parts trimmed up the front bumper(can't tell unless your know where to look) and I had them remove the mud flaps on the front. I was going to have them remove the backs but it was built into the cladding.

 

[chudiddy]

Okay, atleast I know what im getting into. Thanks for the reply

 

[chaz]

the rubbing comes in from the wheel spacers, heres how to trim. Toyota 4Runner Wheel Spacers

 

[Milam]

the rubbing comes in from the wheel spacers, heres how to trim. Toyota 4Runner Wheel Spacers

That is correct. Before the spacers I didn't have any rubbing

 

[Casper421]

Looks good!! :bigok: With it lifted after the first week or so, whats next on your list?

 

[Milam]

Not much else at this time. I'm going to get WeatherTech Side Window Deflectors and Digital Fit Floor Liners. I was also thinking about putting a Tacoma Skid Plate on the front.

I just replace the spark plugs with the iridium plugs and most likely getting the injectors serviced this week as well.

I had some Bilstein 5100 Series Shocks and Struts ordered but found out that I had the XREAS. I had 4wheel parts check them out and they said they looked fine for now.

 

[TEPUI]

Great look! I'd like to do something similar but since my front shocks need replacement I might go with OME for the front and do Daystar rear spacers

 

[XenonDepot]

Good choice on the WeatherTech Liners and WeatherTech Visors!

Steve