Fox and Radflo Coilovers (2.5" dia / 600 lb coils)

[Bicepus Maximus]

Almost ready to buy one of these. But I can't find any feedback from anyone outside of [MENTION=74569]SOcalTRAIL[/MENTION] who runs (or has run) these shocks.

I would get them with 600 lb coils. Hopefully someone runs either of these setups and can provide some feedback on their experience?

Thanks in advance.

 

[mikey's2010SR5]

I am happy with my Radflo setup. Going to be getting it rebuilt soon. I run the 2.5 setup with 700 lb springs.

No experience with fox though.

 

[cbielat]

I run Radflo but currently have only the 2.0" shock body, so no helping you there. My spring rate is 650 lbs though. I have been pretty happy with the Radflo set up I'm running right now. I will most certainly upgrade to the 2.5" shock bodies when I decide to revamp the suspension.

 

[KVA]

I am happy with my Radflo setup. Going to be getting it rebuilt soon. I run the 2.5 setup with 700 lb springs.

No experience with fox though.

I just did all four corners - Radflo 2.5/700... runs about $100 each +/- for the rebuild and additional if you add anything/replace items.

 

[mikey's2010SR5]

I just did all four corners - Radflo 2.5/700... runs about $100 each +/- for the rebuild and additional if you add anything/replace items.

Going to be adding remote resis with adjusters while I am at it too. Already been in contact with then regarding. Just figuring out finances for other things first.

 

[phillyd2]

If adding a winch up front than should consider 650 lbs. If a bumper than 700 lbs. I'm running OW Radflo 2.5" with 650 lbs with no complaints.

 

[Bicepus Maximus]

Ordered the following:
LR UCAs
Fox 2.5" coilovers (non-resi) c/w 600 lb spring
Fox 2.0" rear dampers (non-resi)
All-Pro 2" lift rear coils (used)

No Fox retailer/dealer near me has stock. Should be here in a couple of weeks.

Maybe I'll do a build thread and post some pics and my review in there.

 

[phillyd2]

Any reason you went 2.5 upfront and 2.0 in the rear?

 

[Bicepus Maximus]

Only option Fox has for the 4Runner. They don't make 2.5s for the rear. I talked to them in the past and they told me 2.5 rear dampers are overkill for this type of vehicle.