Front bumper cut at Toyota on 2020 Pro's

[BIGTX]

Just checked mine and, sure enough, it's been trimmed.

 

[BradRunner]

Interesting to have to do this for 265s. And the variety from hack to a clean cut astounds me.


Sent from my iPhone using Tapatalk

 

[83Mule]

I had 265's....no rub. I had 275's and a small rub in the rear only. I had UCA's with 4.0 caster and small rub at the rear. I have 285's and 1.25 spacers and a BMC and I still have never come close to rubbing anywhere in the front?

 

[1jzgte]

nice touch w/ the edge covers!

 

[ivancook]

I found something online that gives measurements and a template from part number PTR25-89150.

Sent from my iPhone using Tapatalk

Bumping an old thread, but any chance someone still has this template as a PDF?

 

[TRDHULK]

Bumping an old thread, but any chance someone still has this template as a PDF?

This thread is pointing out the cut done at the port on Pro's only. They did not provide the template

 

[Maj_Beck]

Bumping an old thread, but any chance someone still has this template as a PDF?

If you ever find that free downloadable PDF template, please post it. Think I had it on an old laptop, it's gone now.

 

[Maj_Beck]

Never mind, I think I found it, very old drive had it

Page 9-10 of MC-10182950-9999.PDF
Found at
https://static.nhtsa.gov/odi/tsbs/2017/MC-10182950-9999.pdf
https://drive.google.com/file/d/19C7vk6DawzXz33BlITAutSU9GPHSCjnX/view?usp=drive_link

 

[hamsey]

Maj_Beck

Nice find. Thank you! Need to do this mod after installing 265/70R17 LTX M/S2 on TRD Pro wheels on my limited after being told that there would be no rubbing with this setup.

Thanks again!