front D ring mounts

[FrogginAround]

Picked a set up for my 02 about 2-3 months ago as well as some new bolts from Toyota.

Do you remember what size bolts? I tried matching them at the hardware store and it seemed like it was between 60 and 70mm.

 

[danwyl]

Do you remember what size bolts? I tried matching them at the hardware store and it seemed like it was between 60 and 70mm.

I have the part numbers here:
90119A0029
9164281235

I can pull them off tomorrow if you want me to measure them.

 

[kyrin]

Cool looks way better than the factory hook

 

[legokcen]

Sorry for not replying to these earlier. I've had several orders and have two sets fabricated earlier today to go out this week after paint.

The bolts are 12mm x 1.5
the short ones are 35mm the long ones are 65 mm.

 

[losso]

How much for the long ones

 

[cl4Rk]

[MENTION=24804]legokcen[/MENTION] I'd like to order a set of the "lower brackets" for my fat lip '00. Just checking to make sure you're still making these (and find out lead times) before I place an order at Trackdecal.com - Road Course Decals and Motorsports Graphics

Thanks!

 

[3bears]

[MENTION=24804]legokcen[/MENTION] I'd like to order a set of the "lower brackets" for my fat lip '00. Just checking to make sure you're still making these (and find out lead times) before I place an order at Trackdecal.com - Road Course Decals and Motorsports Graphics

Thanks!

I had forgotten about these and since my current 4runner does not even have the hooks ( someone must have taken them off) i have been trying to remember to chase down something, even stock hooks are better than nothing.

 

[flyfisher117]

Also following to see if still available

 

[legokcen]

Yes! They're still available. They're usually made when ordered and I just sent my last set out for an order last week. They can be ordered from

Trackdecal.com - Road Course Decals and Motorsports Graphics

They're on the bottom of the page.

Thanks!

 

[cl4Rk]

Yes! They're still available. They're usually made when ordered and I just sent my last set out for an order last week. They can be ordered from

Trackdecal.com - Road Course Decals and Motorsports Graphics

They're on the bottom of the page.

Thanks!

Mine just arrived; thank you!!

Waiting on new bolts from Toyota. Once everything is installed I’ll post some photos.

 

[3bears]

glad you got them, did you get their shackles ( d rings) , wont do any good if you put on junk ones so make sure you use quality shackles ( shackles ,,,d rings...just depends who you are talking to up here)

btw I follow your posts and what you are doing to the 4runner.....nice work

 

[cl4Rk]

glad you got them, did you get their shackles ( d rings) , wont do any good if you put on junk ones so make sure you use quality shackles ( shackles ,,,d rings...just depends who you are talking to up here)

btw I follow your posts and what you are doing to the 4runner.....nice work

I got some 3/4” d-rings that say they meet the ASME standards and are stamped with a 4 3/4 ton working load limit. Hopefully they’ll work if/when I need them..

Thanks for the kind words. I continue to learn so much from this forum!!

 

[flyfisher117]

Mine just arrived; thank you!!

Waiting on new bolts from Toyota. Once everything is installed I’ll post some photos.

You dont happen to have part #s for the bolts do you? I was wanting to get new ones myself.

 

[cl4Rk]

You dont happen to have part #s for the bolts do you? I was wanting to get new ones myself.

I cannot confirm these are correct since I haven’t received them yet, but for my 2000 SR-5 4WD automatic transmission, I ordered:

- 2x Part Number 90119A0029
- 2x Part Number 9164281235

I’ll update this thread once I confirm. There was at least one bolt on Toyota Parts diagram that was listed as discontinued, so we’ll see…

I have not personally measured the original bolts, but earlier in the thread [MENTION=24804]legokcen[/MENTION] mentions the bolts are:

- M12-1.5 x 35mm (qty 2)
- M12-1.5 x 65mm (qty 2)

 

[sleepydad]

I cannot confirm these are correct since I haven’t received them yet, but for my 2000 SR-5 4WD automatic transmission, I ordered:

- 2x Part Number 90119A0029
- 2x Part Number 9164281235

I’ll update this thread once I confirm. There was at least one bolt on Toyota Parts diagram that was listed as discontinued, so we’ll see…

I have not personally measured the original bolts, but earlier in the thread [MENTION=24804]legokcen[/MENTION] mentions the bolts are:

- M12-1.5 x 35mm (qty 2)
- M12-1.5 x 65mm (qty 2)

99.9% sure they are M12-1.25

they are a pain to find in decent grade at a good price.

I usually source from these guys... had really good luck with them, fast shipping and excellent quality.

JIS Metric Hex Flange Bolts

 

[cl4Rk]

You dont happen to have part #s for the bolts do you? I was wanting to get new ones myself.

Just confirming that these part numbers worked for me:

- 2x Part Number 90119A0029
- 2x Part Number 9164281235

 

[legokcen]

I just had two orders, black and red, go out in time for Christmas. I won't be back home until after Christmas, but if anyone wants these for the New Year, they can definitely be made.

 

[flyfisher117]

Just confirming that these part numbers worked for me:

- 2x Part Number 90119A0029
- 2x Part Number 9164281235

Awesome thank you. I'll probably just order these then. I could get grade 8 bolts through work for a good price but also didn't want to go through that hassle so this will be easier.

 

[Pj Benn]

Do those accept soft shackles?

 

[phattyduck]

Do those accept soft shackles?

The holes look large enough - but you'd probably want to soften the corners a bit for that.

-Charlie