front D ring mounts

[cl4Rk]

Just here to thank [MENTION=24804]legokcen[/MENTION] again for these shackle mounts. Over the weekend, I got stuck near the top of a very steep and muddy hill and used them to get pulled up and over Worked perfectly. No interference with my lower "fat lip" bumper.

 

[MountainBiker]

Yes! They're still available.

[MENTION=24804]legokcen[/MENTION], I placed an order for the long brackets May 31. I haven't received a confirmation, so I hope you still make these!

 

[legokcen]

[MENTION=24804]legokcen[/MENTION], I placed an order for the long brackets May 31. I haven't received a confirmation, so I hope you still make these!

I'm so sorry for not responding earlier. I've been traveling for work and have just gotten back this weekend. I just sent you the tracking number for the shipment via DM. You should be seeing them in the next few days.

 

[legokcen]

Just here to thank [MENTION=24804]legokcen[/MENTION] again for these shackle mounts. Over the weekend, I got stuck near the top of a very steep and muddy hill and used them to get pulled up and over Worked perfectly. No interference with my lower "fat lip" bumper.

I'm so glad they worked for you! I've pulled myself out of a mess as well with them!

 

[MountainBiker]

Mounted up with the fat lip bumper! Yes, these could be made with more clearance to the fat lip bumper bracket, but then you'd have more of a potential moment applied to the bolts, especially with a pull that isn't inline, so I'm okay with the tradeoff. No need for photos, they look exactly like you can see in this earlier post.

 

[legokcen]

Glad they fit and worked well. Having them dropped down more would be a higher risk of damaging the bolts of frame, especially if the pull is not completely straight. We had to find a compromise between strength and clearance of the bumper.

 

[t4rmonte]

Are you still making recovery points for 3rd Gens? I tried to go to Trackdecal.com , but it says 'Service Temporarily Unavailable'.

 

[legokcen]

Are you still making recovery points for 3rd Gens? I tried to go to Trackdecal.com , but it says 'Service Temporarily Unavailable'.

I'm sorry for that. Yes, I'm still making them. I had an issue with hosting and they lost the data so I have to upload my backup. I unfortunately realized too late. I do still make these and I know they're usually wanted around the holidays. I'll upload the website this week and make it active again, but if anyone wants them in the meantime, please reach out via PM. I'll get you a set.

 

[t4rmonte]

Glad to hear that you're still making them. I would like a set in black. I'll try to reach out to you via PM. I'm new to the board so I'll see what I can do...

 

[R Marra]

Front D Ring Mounts

Do you think that these would work with an amped up winch plate?
I had tried to search but didn't find anything saying that they would work or not. I wasn't really too sure about the ones that are offered with the winch plate they seem to take away from the whole hidden aspect while yours look a lot stronger by frame mounting.

If I missed them in use in that respect I apologize, Just a thought.
Thanks Ray.